diLUSSO OV608SDS Manuale d'installazione e d'uso - Pagina 5
Sfoglia online o scarica il pdf Manuale d'installazione e d'uso per Forno diLUSSO OV608SDS. diLUSSO OV608SDS 18. Side opening door built-in oven
Stampa la pagina
The sides and the face surface where the oven is to be installed should be milled to allow sufficient air intake and
circulation around the oven, to avoid causing any damage to the furniture.
Ensure the oven is secured firmly in place as described above, and insulate electrical connections in order to
avoid contact with metallic parts. Any protective parts must be secured so that they can only be removed with
the use of tools. The adhesive joining the rolled sections to the cabinet has to withstand temperatures no lower
than 120°C to avoid deformations or instability.
For the most efficient air circulation, the oven should be fitted according to the dimensions shown. The rear
panel of the cabinet must be removed so that air can circulate freely. The cabinetry above and below the oven
should also have a minimum 70mm rear cavity to ensure sufficient airflow.
Do not switch on the appliance before it has been fully and correctly installed.
Before using the oven, we suggest to:
Remove the special film covering the oven door glass (if there is any)
Heat the empty oven at max. temperature for 45 minutes. This is to remove any unpleasant smell caused by
working residues.
Carefully clean the internal cavity of the oven with soapy water and rinse it.
IMPORTANT!
When the oven is in operation, hot surfaces might occur at the oven door. Make sure children do not go near the oven
when it is in use.
Version 1.0
Page 4
May 2021