Motorola CLP107e Manuale d'uso - Pagina 20

Sfoglia online o scarica il pdf Manuale d'uso per Radio bidirezionale Motorola CLP107e. Motorola CLP107e 42.

MN007419A01-AA

Chapter 2: Getting Started

2.9

Monitoring Channels

Procedure:

1 To activate the monitor selection mode, press the Menu button and navigate to Monitor

Selection.

If the monitor is off, you hear a voice prompt to activate the monitor mode by pressing the + or -

button.

2 Press + or - button to activate or deactivate the monitor mode.

When the monitor mode is on, you hear static if no activity is present or audio if channel activity

is present.

3 To engage the monitor mode, enable monitor through the menu and let the menu time out.

4 To exit the Monitor mode, press the PTT button.

2.10

You can scan up to 8 channels on CLP107e model.

When the radio detects activity, it stops scanning and locks in on the active channel. This allows you to

listen and talk to the person transmitting without changing channels.

2.10.1

Procedure:

1 To navigate to Scan mode, press the Menu button.

If the scan is off, you hear a voice prompt to activate Scan by pressing the+ or - button.

2 To activate scan, press + or - button.

When scan is on, you hear a voice prompt to deactivate Scan by pressing the + or - button.

3 To deactivate scan, press + or - button.

2.11

This feature maximizes communication coverage for an on-site repeater enabled on two way radio

systems.

Dynamic Talkaround Scan is enabled on a repeater channel through the Customer Programming

Software (CPS). The feature gives the radio the ability to scan the transmit and receive frequencies of

a repeater channel.

NOTICE: The feature is given higher priority than the scan mode. If the Dynamic Talkaround

Scan and Scan are enabled on the home channel, then the radio can only support the Dynamic

Talkaround Scan.