Motorola CLS 1110 Manuale d'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale d'uso per Radio bidirezionale Motorola CLS 1110. Motorola CLS 1110 30. Cls series two-way radio

Talking and Receiving

1. Press and hold

clear to use. Do not transmit if someone is speaking on the channel. Press

again to stop monitoring.

2. To talk, press and hold Push to Talk and speak into the microphone. Hold the

radio 2 to 3 inches away from your mouth.

3. To listen, release Push to Talk.

The transmit LED on the top of the radio is red when transmitting.

When there is activity on a frequency, the radio displays w and the

transmit light flashes at a faster rate of once per second.

When there is activity on the same frequency and code as your radio

(your radio is receiving), the radio displays w and a signal strength

from 1 (weakest) to 6 (strongest). This can help determine when a

radio is moving out of range.

Note: Obstacles that block the signal path may affect the strength of the incoming

signal.

Industrial

Inside steel/concrete

industrial buildings

Up to 200,000 sq. ft.

The CLS1410 model radio can operate handsfree when used with compatible voice

activation (VOX) accessories. A short delay occurs between the time when you start

talking and when the radio transmits.

With Compatible VOX Accessories

1. Turn the radio off.

2. Open the accessory cover.

3. Plug the audio accessory firmly into the accessory jack.

4. Turn the radio on. The radio displays g. If g is flashing

and you are setting up the VOX accessory for the first

time, set the VOX sensitivity level (see page 23).

5. Lower the radio volume BEFORE placing the accessory

in or near your ear.

to check for channel activity. If you hear static, the channel is

Multi-Level

Inside multi-level

buildings

Up to 15 floors

Outdoor

Flat ground with no

obstructions

Up to 5 miles