Motorola CLS1410 Manuale d'uso - Pagina 16

Sfoglia online o scarica il pdf Manuale d'uso per Radio bidirezionale Motorola CLS1410. Motorola CLS1410 30. Cls series two-way radio
Anche per Motorola CLS1410: Manuale d'uso (17 pagine)

Stampa la pagina

Programming the Interference Eliminator Code

The interference eliminator code helps minimize interference by providing code

combinations that filter out static, noise, and unwanted messages.

1. In programming mode, press

number flashes.

2. Press [ or ] to select the code (see page 42).

3. Press and hold Push to Talk to exit programming mode, or press

to continue programming.

Programming the Available Channels (CLS1410 only)

If you need fewer channels, you can reduce the number of available channels.

1. In programming mode, press

number flashes.

2. Press [ or ] to select the number of channels you want

available.

3. Press and hold Push to Talk to exit programming mode, or press

to continue programming.

Note: The radio retains settings for channels made unavailable.

Programming Call Tones and VibraCall

Your radio can transmit call tones to other radios in your group so you can alert them

that you are about to talk. Your radio is programmed at the factory with call tones

turned off (set to 0), but you can change this setting to choose a distinctive call tone.

The VibraCall

feature is an additional call tone option that makes the CLS1410 radio

vibrate briefly when it receives if you have not transmitted or received in the last

30 seconds. Select call tone 4 to turn VibraCall

VibraCall

is on.

1. In programming mode, press

2. Press [ or ] to hear and select the call tone. Select call tone 4

for VibraCall

3. Press and hold Push to Talk to exit programming mode, or press

to continue programming.

To transmit your call tone, press B on the side of the radio.

until y displays and the code

until = displays and the channel

until E displays.

(CLS1410 only).

(CLS1410 only)

on. i displays on the radio when