Motorola MBP36S Manuale d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso per Baby Monitor Motorola MBP36S. Motorola MBP36S 29. Digital video
Anche per Motorola MBP36S: Manuale d'uso (28 pagine), Manuale d'uso (28 pagine), Manuale d'uso (28 pagine), Manuale di avvio rapido (4 pagine), Manuale d'uso (31 pagine), Manuale (7 pagine), Manuale di avvio rapido (2 pagine), Manuale di avvio rapido (2 pagine), Manuale di avvio rapido (2 pagine), Manuale d'uso (28 pagine), Manuale di avvio rapido (2 pagine)

Stampa la pagina
Motorola MBP36S Manuale d'uso
2. During power ON, when adapter is plugged in, the battery icon on screen's
top right corner will show that the battery is charging. The Blue LED at the
top left corner light up indicates adapter is plugged in.
2.4

Registration (Pairing)

The Baby monitor is pre-registered to your Parent Unit. You do not need to
register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the procedure
below:
M
1. Press the
button of the parent unit and the menu bar will pop up.
<
2. Press the
LEFT button or
del/add/view/scan
the
+
3. Press the
UP button or
button to confirm.
cam 1
cam 2
4.
/
/
button to select the desired CAM and press the
searching for a camera unit. The green audio level LED will flash rapidly
while searching.
O
5. Press the
6. Press and hold the PAIR button underneath the baby unit until the parent
unit finds the camera, beeps and the video from the camera appears.
NOTE
If a particular Baby Unit was registered previously, registering this current
Baby Unit again will overwrite the old registration.
2.5

View Video Through TV

Connect a suitable AV cable into the AV OUT socket on the side of the Parent
Unit and into the AV input of the TV. Scroll to select
through the AV inputs on the TV menu until the Baby monitor picture is visible.
AV cable is an optional accessory, which is to be purchased separately.
NOTE
The Monitor's power button must be turned ON and CAM pre-selected before
connecting the AV cable. Once the AV cable is connected, the Monitor's
controls cannot be activated.
You can hear also your baby in mono mode by connecting the 3.5mm plug
wired headset to the AV OUT socket.
Getting Started
>
menu will pop up.
-
DOWN button to select
cam 3
cam 4
/
will pop up, press the
button to confirm.
RIGHT button until
+
O
is highlighted, and
add
, and press the OK
-
UP button or
DOWN
button to start
on the Parent unit. Scroll
11