Motorola MBP36S-3 Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Baby Monitor Motorola MBP36S-3. Motorola MBP36S-3 28. Digital video
Anche per Motorola MBP36S-3: Manuale d'uso (29 pagine), Manuale d'uso (28 pagine), Manuale d'uso (28 pagine), Manuale d'uso (28 pagine), Manuale di avvio rapido (4 pagine), Manuale d'uso (31 pagine), Manuale di avvio rapido (2 pagine), Manuale di avvio rapido (2 pagine), Manuale di avvio rapido (2 pagine), Manuale di avvio rapido (2 pagine)

2.3

Parent Unit Power Supply

IMPORTANT

Installing the rechargeable battery pack and charging it fully before use is

recommended. This will allow the unit to operate on battery in the event of a

power failure.

Connect the small plug of the power adapter to the parent unit and the

other end to a suitable mains power socket.

adapter (5V

DC / 600mA) with the slightly smaller DC plug.

2. Press and hold the

the parent unit.

3. Once the baby and parent units are switched on, the display on the parent

unit will show the video captured by the baby unit.

4. If there is no connection or you are out of range, the video display will go

off,

and the unit

the baby unit until

5. Press and hold the

finishes scrolling, to turn OFF the parent unit.

NOTE

The battery icon

a beep every 16 seconds. The battery needs to be recharged. The battery pack

takes about 12 hours to charge fully.

When charging

1. During power OFF, when adapter is plugged in, a adapter logo will display

on screen and then a flashing battery logo will display for 45 sec. The Blue

LED at top left corner light up indicates adapter is plugged in.

POWER ON/OFF button for 1 second to turn ON

will beep every 5 seconds. Move the parent

the link is re-established.

POWER ON/OFF button, until the progress bar

turns RED to indicate that the battery is low, and it gives

Only use the enclosed power

unit closer to

Getting Started