Epson Powerspan Manuale informativo sul prodotto - Pagina 12

Sfoglia online o scarica il pdf Manuale informativo sul prodotto per Desktop Epson Powerspan. Epson Powerspan 13. Product information guide
Anche per Epson Powerspan: Manuale informativo sul prodotto (12 pagine), Specifiche tecniche (10 pagine)

Stampa la pagina

EPSON PowerSpan

Installation/Support Tips

System Power Requirements

The power cord must be rated for at least 125% of the current

rating of the AC voltage system and must be less than 4.5

meters (14.76 feet) long to comply with the system's safety

requirements. Do not use or attempt to modify the supplied

AC power cord if it is not the type required for use in your

region.

To avoid permanent damage to the computer, be sure the

voltage selector switch is set to the correct input line voltage

before you turn on the power. The computer is shipped with

the voltage selector switch set to 115 VAC, which is

appropriate for line source voltages between 100 and 120

VAC. If the line source voltage in your location is between

200 and 240 VAC, make sure you set the switch to 230 VAC.

Keyboard and Monitor

Even if you intend to use this system as a network file server,

you need to connect a monitor and a keyboard to complete

the installation. You may remove them once the installation is

complete.

Mouse and Keyboard

When connecting the mouse and keyboard, be careful to plug

them into the proper ports. Although they are physically

identical, they are not interchangeable, and damage may

occur to the ports or the main system board.

Option Cards

The order in which you install option cards depends on the

type of cards you have. If you install only ISA option cards

that do not have their own configuration files, install them

before you connect your peripheral devices. Follow the

instructions in your ISA card manual to set the card's

switches or jumpers for your system.

Also install any EISA cards you plan to use before you

connect peripheral devices so your EISA Configuration utility

can automatically detect the cards and configure them

correctly.

If you install ISA cards that came with their own

configuration (CFG) files, install them after you have

connected the necessary peripheral devices and run the

computer's EISA Configuration utility. This allows you to

add the CFG file information to your configuration so the

program can give you the card's correct jumper and switch

settings. Then you can set the switches and jumpers and

install the card. See the documentation that came with your

card(s) for more information.

Epson PowerSpan-12

SETUP

Use the SETUP program in your system's BIOS ROM to

configure your computer if you installed only ISA option

cards that did not come with CGF files or you do not have a

diskette drive or you have disabled the diskette drive.

Run the EISA Configuration utility on the Reference diskette

to configure your system if you have installed EISA option

cards or you have installed an ISA option card that came

with a configuration file.

Information Reference List

Engineering Change Notices

None.

Technical Information Bulletins

None.

Product Support Bulletins

None.