Motorola B801 Manuale d'uso - Pagina 16

Sfoglia online o scarica il pdf Manuale d'uso per Telefono cordless Motorola B801. Motorola B801 47. Dect 6.0 cordless answering system with bluetooth wireless technology
Anche per Motorola B801: Manuale di avvio rapido (8 pagine)

Motorola B801 Manuale d'uso
1. Press and hold either of the Bluetooth buttons (depending on which button you would like to
use first) on the telephone base until the corresponding Bluetooth LED is flashing. The Bluetooth
feature will be activated.
2. Using your cellular phone, turn on the Bluetooth feature and search for a new device.
3. Once your cellular phone has found the Motorola B801 series telephone base, select it.
4. Using your cellular phone, enter the PIN of the telephone base (the default PIN is 0000) to
continue the pairing process.
Pairing a Bluetooth headset
1. Follow step 1 as in section Pairing a cellular phone.
2. Using your Bluetooth headset, turn on the Bluetooth feature and search for a new device.
3. Refer to the user's guide of your Bluetooth headset to proceed with the after steps.
NOTE
Only Bluetooth headset with passkey 0000 can be paired with the telephone base system.
When a device is successfully connected, the light of the Bluetooth button you just pressed and
held on the telephone base will be on steadily. And the Bluetooth status icon will display on the
handset screen. If cellular phone(s) paired up, sequence number
or
(depending on which
Bluetooth button you just pressed and held) will also be displayed.
If you would like to continually pair up another Bluetooth device, please repeat the steps as
indicated above. Please note that you need to press another not lit Bluetooth button to initiate the
pairing process. Press the light on Bluetooth button will terminate the connection between the
telephone base and Bluetooth device via this button.
Auto connection
Once you have paired a device with the telephone base, the pairing information is stored in the
telephone base. If the paired device becomes disconnected, the telephone base will automatically
search and re-connect to that device. If the connection does not resume in a minute, you will
need to re-connect to that device manually, refer to the section below for details.
Manual connection
To manually re-connect a paired device, make sure the Bluetooth feature is turned on in your
cellular phone, select Motorola B801 series from the paired device list in your cellular phone.
Once the connection is established again, the corresponding Bluetooth button which you used to
pair up the Bluetooth device on the telephone base will turn back on.
Turning off the auto connection
If you do not want the telephone base to re-connect to a paired device automatically after it is
disconnected, you can turn off the auto connection feature manually. In order to turn off the auto
connection, you will need to initiate a disconnection from the paired cellular phone; this will
transmit a signal to the telephone base and disable the auto connection.
While the cellular phone is connected to the telephone base, find the cellular phone's Bluetooth
device list and select Motorola B801 series to manually disconnect the device. (If disconnection
is not an option on your cellular phone, you may need to disable Bluetooth or unpair the
telephone base.) Refer to your cellular phone's user's guide for instructions. The telephone base
will not search and re-connect to this cellular phone until this feature is activated again.
To resume the auto connection
To resume the auto connection between the paired device(s) and the telephone base, you will
need to connect the device(s) manually. Make sure the Bluetooth feature is turned on in your
cellular phone. Select Motorola B801 series from the paired device list in your cellular phone to
reconnect. If the connection is successfully resumed, the status icon will display on the handset