Motorola C604 Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Telefono cordless Motorola C604. Motorola C604 39. Digital cordless phone
Anche per Motorola C604: Manuale di istruzioni (44 pagine), Manuale (39 pagine)

Stampa la pagina

1. Getting started

WARNING

Do not place your C6A in the bathroom or other humid areas.

Location

You need to place your C6A base within 2 metres of the

mains power and telephone wall sockets so that the cables

will reach. The socket-outlet shall be installed near the

equipment and shall be easily accessible.

Make sure that it is at least 1 metre away from other

electrical appliances to avoid interference. Your C6A works

by sending radio signals between the handset and base. The

strength of the signal depends on where you place the base.

Placing it as high as possible ensures the best signal.

HANDSET RANGE

The unit has a range of up to 300 metres outdoors when there

is a clear line of sight between the base and handset. Any

obstruction between the base and handset will reduce the

range significantly. With the base indoors and the handset

either indoors or outdoors, the range will normally be up to 50

metres. Thick concrete walls can severely affect the range.

SIGNAL STRENGTH

The

icon on your handset indicates that you are within

range of the base. When out of range of the base, the

icon flashes. If you are on a call, you will hear a warning

beep.

The line will hang up if the handset moves out of range of the

base. Move closer to the base. The handset will

automatically reconnect to the base.

Setting up

IMPORTANT

The base station must be plugged into the mains power at all

times. Do not connect the telephone line cord into the wall

socket until the handset is fully charged. Use only the power

adaptor and telephone line cord supplied with the product.

WHICH POWER ADAPTOR?

The power adaptor with a clear connecter is for the base unit

and the power adaptor with a red colour connecter is for the

charger unit (for multi-pack only).

Connecting the base

1. Plug the telephone line cord into the socket marked

on the underside of the base.

Getting started