Motorola GM1200 Series Manuale d'uso - Pagina 8
Sfoglia online o scarica il pdf Manuale d'uso per Radio Motorola GM1200 Series. Motorola GM1200 Series 19. Gm series professional radio
Anche per Motorola GM1200 Series: Manuale di servizio (28 pagine)
Stampa la pagina
Receiving a Call
Receiving a call on a Full Off Air Call Set Up
(FOACSU) System
When the radio is called, tone E will sound and the
display will change to:
ALERTED
213
Press either the PTT or
microphone to accept the call. Tone D will sound
until a traffic channel is allocated then tone B will
sound and the display will change to indicate the
type of call being received. See "Call Progress -
Receiving".
Note:
The system may have a limited call time and the
call may be terminated automatically if this call
time is exceeded.
Call in Absence
If a call is not answered within a preprogrammed
amount of time, the call will be stored by the radio.
Up to 10 calls can be stored. If the same radio calls
more than once the call is only stored once. When
10 calls have been stored by the radio, the eleventh
call received overwrites the first.
8
Receiving a Call/Call in Absence
English
ALERT
followed by
213
key (K8 only) or lift the
#
When a call has been stored by the radio, tone G
will sound every ten seconds and the display will
show the identity of the calling party. The call in
absence icon
will be lit.
To view the calls in the stack, press the call in
absence button
(15). The call in absence
display will look like this:
01
213
where "01" indicates the position in the stack and
"213" is the number of the calling party.
The most recent call stored by the radio will be on
position "01". Operate the selector (16 & 17) to
display any other calls in the stack.
Press either the PTT or
call. The number stays in the stack until the clear
button
(6) is pressed,
C
personality of the radio is changed.
To exit the Call in Absence stack, press the call in
absence button
(15).
Note:
The calls in the stack are not deleted when the
radio is turned off. It is not possible to call back
status calls.
01
followed by
213
key (K8 only) to make a
#
is dialled or the
#