Motorola GP280 Manuale d'uso - Pagina 23
Sfoglia online o scarica il pdf Manuale d'uso per Radio Motorola GP280. Motorola GP280 46. Professional radio, power distribution and controller
Anche per Motorola GP280: Manuale d'uso (46 pagine), Informazioni sul servizio (32 pagine), Informazioni sul servizio (30 pagine), Informazioni sul servizio (30 pagine)
UG_240_280_EN.fm Page 19 Wednesday, August 14, 2002 10:30 AM
RECEIVING A CALL
1.
Turn the radio on and select the desired
zone and mode (see Selecting a Zone and
Mode).
2.
Your radio is now set to receive calls on the
selected mode.
MAKING A CALL
Conventional Modes
1.
Turn the radio on and select the desired
conventional zone and mode (see Selecting
a Zone and Mode).
2.
Press and hold the PTT switch on the side of
the radio and speak slowly and clearly into
the microphone area. The red LED lights
continuously when the radio is transmitting.
3.
When you have finished talking, release the
PTT to listen.
Note: Do not interrupt another user. If the present
mode is programmed to receive PL, ensure that
Downloaded from
www.Manualslib.com
manuals search engine
• If the mode-busy feature is enabled, a
blinking red LED on receive (PTT released)
indicates that the mode is currently busy.
• If a mode is programmed for receive only,
any attempt to transmit on that mode will cause
an invalid-mode tone to sound until the PTT
switch is released.
Trunked Modes
1.
Turn the radio on and select the desired
trunked zone and mode (see Selecting a
Zone and Mode).
2.
Press and hold the PTT switch on the side of
the radio and speak slowly and clearly into
the microphone area. The red LED lights
when the radio is transmitting. When you
have finished talking, release the PTT to
listen.
Note: If you hear a busy signal (a low-frequency
"bah-bah-bah-bah"), release the PTT switch and
wait for a call-back tone (sounds like "di-di-dit").
When you hear the call-back tone you will have
three seconds to press the PTT switch. This