Motorola MCS 2000 Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Radio Motorola MCS 2000. Motorola MCS 2000 20.
Anche per Motorola MCS 2000: Manuale di installazione (14 pagine), Istruzioni per il retrofit (11 pagine)

Stampa la pagina

MCS 2000 Model I

Keypad Selection:

(with optional keypad microphone)

Press the call button (12) or select PVT CALL through the

menus and enter the desired ID directly from the keypad.

Until the ID is completed the last digit may be erased

by pressing down the mode selector (D). Continue

pressing the mode selector (D) down to erase the

entire ID. Then enter the correct ID.

When the ID has been selected in one of the two ways

described above, the private call may be transmitted

to the displayed ID by pressing the PTT (F).

Enhanced Private Call

If an Enhanced Private Call is not answered within 20

seconds the display changes into

NO ANSWR

Press the PTT (F) to leave your ID with the called radio

so that you will be called back later. The call alert sent

tone will sound.

Caller ID

The radio will momentarily display the ID or alias name

of the radio that initiated a call. If an emergency call is

received in trunked operation, the radio will alternate

the display between the talkgroup, the emergency

received display and the ID (or alias name) of the radio

that initiated the emergency call.

Mode Preset Buttons

Mode preset buttons will allow quick access to com-

monly used modes. Press and hold a mode preset

button until a good-key tone is heard to program the

button for the currently selected mode. A short press

of a mode preset button will cause the radio to imme-

diately change to the mode programmed for that but-

ton.

Mode Recall

The radio will always remember the last mode

selected. Pressing mode recall will cause the radio to

switch to the previously selected mode.

Note: The "last" mode must be selected for a mini-

mum of 5 seconds to be retained as the "last" mode.

Automatic Power-Off

"Automatic power off" will power off your radio when

no user actions occur during a pre-programmed

length of time. A user action is deﬁned as the press of

a button, turn of a knob or the use of any radio acces-

sory (e.g. footswitch).

page 10

68P81083C48-B