Epson LABELWORKS PX750-LW Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Etichettatrice Epson LABELWORKS PX750-LW. Epson LABELWORKS PX750-LW 4.

Epson LABELWORKS PX750-LW Manuale d'uso
Creating Special Labels
Creating Sequentially Numbered Labels
The number is automatically incremented each time a label is printed.
Up to four digits including numbers (0 to 9) and alphabet letters (a to z and
A to Z) can be entered.
1. Press
.
2. Enter the start value of the sequential numbers and then press
In this example, we will enter "0001".
3. Select the number of repetition with
/
In this example, we will select "2 times".
4. Press
+
.
5. Select "Print copies" with
/
and then press
6. Enter the number of print copies and then press
In this example, we will enter "6".
7. Select "Start print?" with
/
and then press
Printing starts.
Creating Labels with Block Sequence Numbers Assigned
+
You can assign sequential numbers to blocks.
Up to four digits including numbers (0 to 9) and alphabet letters (a to z and
A to Z) can be entered.
Block 1
Block 2
Block 3
1. Create the blocks in advance.
In this example, we have created three blocks.
2. Press
+
.
3. Enter the start value of the sequential numbers and then press
In this example, we will enter "CN01".
Sequential numbers are automatically assigned to block 2 and block 3.
4. Select the number of repetition with
/
In this example, we will select "1 time".
5. Press
.
Creating Barcode Labels
MEMO
• You may not be able to add a barcode depending on the label type you create.
• Only up to two barcodes can be inserted in one label.
Supported barcode types:
EAN-8, EAN-13, CODE128, CODE39, QR CODE, ITF, CODABAR, UPC-A, UPC-E
1. Press
.
2. Select an item with
/
and press
Move on to the next options until the setting is complete.
3. Enter the alphanumeric characters for the barcode and then press
4. Press
.
Creating Labels with Symbol
1. Press
.
2. Select a category with
/
and press
3. Select a symbol with
/
and press
4. Press
.
MEMO
• For available symbols, see "Symbol List" on the separate sheet.
• If you transfer your original symbols from your computer, the symbols are saved in
the "Downloaded" category. For more details, see LW-PX750 User's Guide (PDF
version), which is available from http://labelworks.epson.com.
Cleaning
CAUTION
Turn o the printer and remove the batteries
before cleaning.
If the AC adapter is connected, disconnect
the AC adapter cable from the printer.
Exterior
Wipe the dirt o with a soft cloth.
If it is very dirty, use a damp cloth.
CAUTION
Never use chemicals or solvents such as
benzine, thinner, or alcohol, or use a chemical
duster.
Creating equipment labels
Simply enter the required information to create
equipment labels.
Display
.
and then press
.
1. Press
.
When "Overwrite text?" appears, press
.
2. Use
or edit text.
.
You can also change the default item names.
3. Press
Creating Labels to Wrap around Cable
like a Flag
+
This label is useful for di erentiating cables because the ag
portion of the label wrapped around the cable is easy to see.
Block 1
Text length
.
1. Press
2. Select the setting method of space length with
press
and then press
.
In this example, we will select "Length".
Dia:
Length: Sets the length by space length.
3. Enter the space length and then press
Setting range: 0.25 to 30 cm
4. Enter the text length and then press
Setting range: 0.25 to 30 cm
5. Select the type of separator with
In this example, we will select "Line".
6. Select the orientation with
In this example, we will select "Hori.2".
Hori.1
Hori.2
Vert.1
Vert.2
7. Enter the text of block 1 and then press
.
8. Enter the text of block 2.
9. Press
.
Creating Labels with Self-Lamination
Overwrap
Use the dedicated Self-Lamination Overwrap.
This label tape comes with transparent lm. The lm
can be wrapped around the label to prevent it from getting dirty.
Label length
.
.
1. Enter the label length and then press
Setting range: 1 to 99.9 cm
2. Enter the text.
3. Press
Printhead
Clean the printhead with a cotton swab.
Label
Default item
names
When you press
, you will see this area.
.
.
/
/
/
to move the cursor to one of the lines, then enter
.
Space length
Block 2
Separator
+
.
/
.
Sets the length by cable diameter.
.
.
/
and then press
/
and then press
.
.
.
.
PeelGuard
WARNING
To prevent the risk of cuts, never insert ngers in the
PeelGuard.
1. Pull out the tray.
2. Remove the tape scraps, then insert the tray
back in the printer.
Tray
Creating Labels to Wrap Around Cable
+
You can repeatedly print text so that it can be seen
regardless of the angle from which the cable is viewed.
Label length
Margin
1. Press
+
.
2. Select the length type with
In this example, we will select "Length".
Dia: Sets the length by cable diameter.
Length: Sets the length by label length.
3. Enter the label length and then press
Setting range: 1 to 99.9cm
4. Select On or O of repeat text with
In this example, we will select "On".
On
O
5.
Select the type of margins with
In this example, we will select "Long".
6. Enter the text.
7. Press
.
Creating Multiple Labels at Once
You can create many labels at once.
and then
Label length
Margin
1. Press
.
2. Select the label length with
Auto: Automatically adjusts the label length depending on the length of text.
.
Set: Sets the label length.
Setting range: 1 to 99.9 cm
.
3. Enter the labels number and then press
In this example, we will enter "3".
4. Select the type of margins with
5. Select the orientation with
In this example, we will select "Hori.".
Hori.
Vert.1
Vert.2
6. Enter "Cable" and then press
Similarly for other labels, enter text and press
7. Press
.
Cutting rounded label corners
You can use the PeelGuard to round o
label corners.
1. Insert the tape in the tape insertion slot,
following the guide.
The tape is cut to form rounded label
corners.
Initializing the Settings
Initialize the settings if the printer does not operate normally such as the display
is interrupted.
Attention
This function initializes the settings. Take extreme care before initializing it. All the
stored text and settings you made will be lost.
1. If the power is on, press
2. Press and hold
+
3. When a message appears, press
The settings will be initialized.
MEMO
To cancel initialization, press a key other than
Tape width
Margin
/
and then press
.
.
/
and then press
.
/
and then press
.
Margin
Tape width
Labels number
/
and then press
.
.
/
and then press
.
/
and then press
.
.
.
Guide
to turn it o .
, and press
.
.
.