Motorola H300 Manuale di avvio rapido
Sfoglia online o scarica il pdf Manuale di avvio rapido per Cuffie Motorola H300. Motorola H300 2. Bluetooth handsfree headset
Anche per Motorola H300: Manuale di avvio rapido (6 pagine)
Stampa la pagina
Start Here > > >
H300
Bluetooth®
Handsfree Headset
Get Connected in
4 Quick Steps
1 - INSERT BATTERY
2 - START
BLUETOOTH
FEATURE
3 - PAIR
4 - TEST AND USE
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
www.hellomoto.com
1-877-MOTOBLU
1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
1-800-461-4575 (Canada)
Part Number: 6809495A08-A
If you need more help, contact us at
1-877-MOTOBLU.
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The Bluetooth trademarks are
owned by their proprietor and used by Motorola, Inc. under
license. All other product or service names are the property of
their respective owners.
The use of wireless devices and their accessories may be
prohibited or restricted in certain areas. Always obey the laws
and regulations on the use of these products.
© Motorola, Inc. 2005.
BEFORE YOU
BEGIN
Before using this product, read the Important Safety and
Legal Information pamphlet and follow its instructions.
Take a moment before you get started to
familiarize yourself with your new
H300 Handsfree
Headset.
Blue
Call
Volume
Indicator
Button
Buttons
Light
Battery
Door
Speaker
Earhook
Microphone
PAIR
3
Your Headset
Step A - PUT HEADSET IN PAIRING MODE
Before you can use your headset, you must
pair (link) it with your phone.
Call
Blue
Button
Indicator
Light
1
With the headset power off, press and hold
the Call button for 6 to 10 seconds until the
blue indicator light turns on and remains
steadily lit. (The light will flash while you
hold the Call button.)
2
If the indicator light is flashing or does not
remain steadily lit, turn off the headset and
repeat step 1.
Note: To turn off headset, see "Turning On and Off" on the
reverse side of this guide.
INSERT BATTERY
1
In Your Headset
Insert a new battery into your headset:
1
Open the battery door at the back of the
headset.
2
Insert a new battery so that the + and -
markings match the markings in the
battery compartment.
3
Close the battery door.
PAIR
Your Phone
Step B - SET THE PHONE TO LOOK FOR
YOUR HEADSET
For most Motorola phones:
Menu
> Settings > Connection >
1
Select
(
)
M(
Bluetooth Link > Handsfree > Look for Devices.
The phone lists all Bluetooth devices it finds.
2
Select Motorola H300.
3
Press OK or Yes to pair (link) the handsfree
device.
4
Enter the passkey 0000 and press OK.
Note: Passkey cannot be changed
from 0000.
When your headset is successfully paired with
your phone, the blue indicator light changes
from steadily lit to flashing.
Note: These steps are for most Motorola phones. For other
phones, see your phone's user's guide.
START BLUETOOTH
2
Feature
On Your Phone
Your phone's Bluetooth feature is off by
default. To use your headset, turn on the
Bluetooth feature in your phone.
For most Motorola phones:
Menu
> Settings > Connection >
1
M(
Select
(
)
Bluetooth Link > Setup.
2
Scroll to Power.
3
Press Change.
4
Scroll to On.
5
Press Select to turn on the Bluetooth
feature. Bluetooth feature remains on until
you turn it off.
Note: These steps are for most Motorola phones. For
other phones, see your phone's user's guide.
TEST AND USE
4
Your phone and headset are now paired and
ready to make and receive calls. To confirm
they are operating properly, make a call:
1
Place the headset over your ear. See
"Wearing the Headset" on the reverse side
of this guide.
2
On your phone, dial the number you want
to call and press the Send key.
3
If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your phone
and headset, you do not need to repeat these
initial setup steps each time you use the
headset.
TROUBLESHOOTING
My phone does not find my headset.
Make sure the blue light on your headset is
steadily lit when your phone is searching for
devices (see step 3).
My headset worked before but now it's
not working.
Make sure your phone is on and the
Bluetooth feature is turned on in your phone
(see step 2). If the Bluetooth feature has
been turned off or was turned on only
temporarily, you may need to restart the
Bluetooth feature (see step 2). If you have
confirmed the Bluetooth feature is on in your
phone, pair your phone and headset again
(see step 3).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com/bluetooth and click
Support.
USING YOUR H300
See Features and Functions Guide
on the reverse side
of this guide
for information on
using your H300.