Motorola Verizon moto g6 Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Cuffie Motorola Verizon moto g6. Motorola Verizon moto g6 26. Wireless bluetooth headset
Anche per Motorola Verizon moto g6: Manuale d'uso (32 pagine), Scheda Faq (15 pagine), Manuale d'uso (5 pagine)

Stampa la pagina

Mounting

The pump exhaust air may contain contam-

•

inants. Ventilate to a remote area. See Air

Exhaust Ventilation on page 8.

Never move or lift a pump under pressure.

•

If dropped, the fluid section may rupture.

Always follow the Pressure Relief Proce-

dure on page 14 before moving or lifting

the pump.

1. For wall mounting, order Kit 859.0107.

2. Be sure the mounting surface can support

the weight of the pump, hoses, and acces-

sories, as well as the stress caused during

operation.

3. For all mountings, be sure the pump is

bolted directly to the mounting surface.

4. For ease of operation and service, mount

the pump so air valve, air inlet, fluid inlet and

fluid outlet ports are easily accessible.

5. Rubber Foot Mounting Kit 819.4333 is avail-

able to reduce noise and vibration during

operation.

Grounding

The equipment must be grounded. Grounding

reduces the risk of static and electric shock by

providing an escape wire for the electrical cur-

rent due to static build up or in the event of a

short circuit.

Pump: See F

. 1. Loosen the grounding screw

(GS). Insert one end of a 12 ga. minimum

ground wire (R) behind the grounding screw

and tighten the screw securely. Connect the

clamp end of the ground wire to a true earth

ground. A ground wire and clamp, Part

819.0157, is available.

Polypropylene and PVDF: Only aluminum,

conductive polypropylene, and stainless steel

pumps have a ground screw. Standard poly-

propylene and PVDF pumps are not conduc-

tive. Never use a non-conductive

polypropylene or PVDF pump with non-con-

ductive flammable fluids. Follow your local fire

codes. When pumping conductive flammable

fluids, always ground the entire fluid system

as described.

. 1. Grounding screw and wire

Air and fluid hoses: Use only grounded hoses

with a maximum of 500 ft (150 m) combined

hose length to ensure grounding continuity.

Air compressor: Follow manufacturer's

recommendations.

Fluid supply container: Follow local code.

Solvent pails used when flushing: Follow

local code. Use only conductive metal pails,

placed on a grounded surface. Do not place the

pail on a nonconductive surface, such as paper

or cardboard, which interrupts grounding conti-

nuity.

ti12214a

859.0088