Motorola SURFboard SBV5120i Installazione e risoluzione dei problemi
Sfoglia online o scarica il pdf Installazione e risoluzione dei problemi per Modem Motorola SURFboard SBV5120i. Motorola SURFboard SBV5120i 4. Software license, warranty, safety, and regulatory information voip cable modem
Stampa la paginaSoftware License, Warranty, Safety, and Regulatory Information
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. THE UNIT
MUST NOT BE EXPOSED TO DRIPPING OR SPLASHING. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ON
THE UNIT.
CAUTION: THIS PRODUCT WAS QUALIFIED UNDER TEST CONDITIONS THAT INCLUDED THE USE OF THE SUPPLIED CABLES
BETWEEN SYSTEMS COMPONENTS. TO ENSURE REGULATORY AND SAFETY COMPLIANCE, USE ONLY THE PROVIDED
POWER AND INTERFACE CABLES AND INSTALL THEM PROPERLY.
CAUTION: DIFFERENT TYPES OF CORD SETS MAY BE USED FOR CONNECTIONS TO THE MAIN SUPPLY CIRCUIT. USE ONLY
A MAIN LINE CORD THAT COMPLIES WITH ALL APPLICABLE PRODUCT SAFETY REQUIREMENTS OF THE COUNTRY OF USE.
CAUTION: TO REDUCE THE RISK OF FIRE, USE ONLY NO. 26 AWG OR LARGER UL LISTED OR CSA CERTIFIED
TELECOMMUNICATION LINE CORD.
CAUTION: INSTALLATION OF THIS PRODUCT MUST BE IN ACCORDANCE WITH NATIONAL WIRING CODES AND CONFORM
TO LOCAL REGULATIONS.
CAUTION: DO NOT OPEN THE UNIT. DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE
INSTALLATION AND TROUBLESHOOTING INSTRUCTIONS. REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION: CHANGES AND MODIFICATIONS NOT EXPRESSLY APPROVED BY MOTOROLA FOR COMPLIANCE COULD VOID
USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
IMPORTANT SAFETY INSTRUCTIONS: When using your telephone equipment, basic safety precautions should always be followed to reduce
the risk of fire, electric shock, and injury to persons, including the following:
•
Read all of the instructions listed here and/or in the user manual before you operate this equipment. Give particular attention to all safety
precautions. Retain the instructions for future reference.
•
This device must be installed and used in strict accordance with manufacturer's instructions as described in the user documentation that
comes with the product.
•
Comply with all warning and caution statements in the instructions. Observe all warning and caution symbols that are affixed to this
equipment.
•
Do not use this product near water–for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement, or near a
swimming pool.
•
Do not overload outlets or extension cords, as this can result in a risk of fire or electric shock. Overloaded AC outlets, extension cords,
frayed power cords, damaged or cracked wire insulation, and broken plugs are dangerous. They may result in a shock or fire hazard.
•
Route power supply cords so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular
attention to cords where they are attached to plugs and convenience receptacles, and examine the point where they exit from the product.
•
Place this equipment in a location that is close enough to an electrical outlet to accommodate the length of the power cord.
•
Place unit to allow for easy access when disconnecting the power cord of the device from the AC wall outlet.
•
Do not connect the plug into an extension cord, receptacle, or other outlet unless the plug can be fully inserted with no part of the blades
exposed.
•
Place this equipment on a stable surface.
•
Postpone cable modem installation until there is no risk of thunderstorm or lightning activity in the area.
•
Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from
lightning. For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet, and disconnect the cable system. This will prevent damage to the product due to lightning and power surges.
•
Do not use the telephone to report a gas leak in the vicinity of the leak.
•
It is recommended that the customer install an AC surge protector in the AC outlet to which this device is connected. This is to avoid
damaging the equipment by local lightning strikes and other electrical surges.
•
Do not cover the device, or block the airflow to the device, with any other objects. Keep the device away from excessive heat and humidity
and keep the device free from vibration and dust.
•
Wipe the unit with a clean, dry cloth. Never use cleaning fluid or similar chemicals. Do not spray cleaners directly on the unit or use forced
air to remove dust.
•
Avoid damaging the cable modem with static by touching the coaxial cable when it is attached to the earth grounded coaxial cable TV wall
outlet.
•
Always first touch the coaxial cable connector on the cable modem when disconnecting or re-connecting USB or Ethernet cable from the
cable modem or the user's PC.
•
Operate this product only from the type of power source indicated on the product's marking label. If you are not sure of the type of power
supplied to your home, consult your dealer or local power company.
•
Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check local codes
for possible special disposal instructions.
•
Disconnect the phone wire (RJ-11) and unplug the power cable before removing the cover.
•
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product
is in safe operating condition.
SAVE THESE INSTRUCTIONS
Be sure that the outside cable system is grounded, so as to provide some protection against voltage surges and built-up static charges. Article 820-
20 of the NEC (Section 54, Part I of the Canadian Electrical Code) provides guidelines for proper grounding and, in particular, specifies the
CATV cable ground shall be connected in the grounding system of the building, as close to the point of cable entry as practical.
®
SURFboard
SBV5120 VoIP Cable Modem