Motorola VT2442 - VONAGE Manuale di avvio rapido - Pagina 8
Sfoglia online o scarica il pdf Manuale di avvio rapido per Modem Motorola VT2442 - VONAGE. Motorola VT2442 - VONAGE 12. Software license, warranty, safety, and regulatory information voice gateway
Anche per Motorola VT2442 - VONAGE: Manuale d'uso (36 pagine), Manuale di installazione rapida (2 pagine), Manuale (4 pagine)
Stampa la pagina
If your Internet connection doesn't work and you
have a cable modem:
1.
Unplug the modem for at least 60 seconds. If left off for
less than 60 seconds, it might still "remember" old
information that could prevent it from working properly.
2.
If your Internet connection still does not work, you may
need to register your Vonage Device with your cable
provider. You will need the MAC ID on the bottom
of the Vonage Device.
If your Internet connection doesn't work and you
have a DSL modem:
1.
Make sure you are using a computer that's connected to
a yellow port on your Vonage Device. On your computer,
open a web browser. In the address field, type
http://192.168.15.1 (the default IP address of the VT2442
Home Page) and press Enter. A login window appears.
2.
In both the Username and Password fields, type router
and click Log In. The Home Page is displayed.
3.
Click the SETUP tab, then WAN Configuration.
From the Type drop-down list, choose PPPoE.
4.
Under Internet Settings, select PPPoE IP Address.
5.
In the Username and Password fields, type the
username and password you normally use to log in to
your DSL service.
6.
In the Keep Alive field, type 0 to ensure that your
DSL link is always active.
7.
Click Connect to start your Internet connection.
Click Apply. Click Save and Restart button on the left
and click Reboot.
Note: If you had an existing router connected to your DSL modem,
but it is now connected to your Vonage device, the router will have
6
to be set up as a DHCP client instead of PPPoE.