Epson TM-L90 series Manuale d'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale d'uso per Etichettatrice Epson TM-L90 series. Epson TM-L90 series 17. Attaching cover on the power switch
Anche per Epson TM-L90 series: Opuscolo (1 pagine), Opuscolo (2 pagine), Specifiche tecniche (2 pagine), Specifiche tecniche (8 pagine), Manuale informativo (5 pagine), Specifiche tecniche (4 pagine), Inizia qui (2 pagine), Inizia qui (2 pagine), Manuale (13 pagine), Manuale di istruzioni (12 pagine), Manuale (2 pagine)

English

CAUTION:

When installing roll paper, be careful not to injure your hands on the manual

cutter.

Troubleshooting

ERROR LED is on or flashing

❏

Make sure that the roll paper cover is closed and the PAPER OUT LED is not

on. Close the cover or replace the paper if necessary.

❏

If the printer has been printing a lot and the print head gets too hot, the

ERROR LED starts flashing, and printing stops. When its temperature cools

down to the normal range, printing resumes automatically.

❏

Turn off the printer and then turn it back on. If the LED is still flashing,

consult with your supervisor or a service person.

PAPER OUT LED is flashing

If the PAPER OUT LED continues to flash even after the issued label is removed,

the label peeler detector may be detecting something. Press the PAPER FEED

button once.

Paper jam

Turn off the power, open the peeler cover, and then open the roll paper cover to

check for a paper jam. If there is a paper jam, remove the jammed paper and

follow the instructions in the Installing Roll Paper section to prepare the printer

for printing.

CAUTION:

After printing, the thermal head can be very hot. Be careful not to touch it and

to let it cool before you clean it. Do not damage the thermal head by touching

it with your fingers or any hard object.

Epson recommends cleaning the thermal head periodically (generally every 6

months) to maintain receipt print quality.

Turn off the printer, open the peeler cover, and then the roll paper cover.

Clean the thermal element of the print head with a cotton swab lightly

moistened with an alcohol solvent (ethanol, methanol, or IPA), as shown in

the illustration.

Close the roll paper cover after the alcohol solvent has dried.

8 TM-L90 with Peeler User's Manual