Epson TM-T20 Manuale di riferimento rapido - Pagina 4
Sfoglia online o scarica il pdf Manuale di riferimento rapido per Etichettatrice Epson TM-T20. Epson TM-T20 4. Esc/pos
Anche per Epson TM-T20: Opuscolo (2 pagine), Manuale d'uso (20 pagine), Scheda tecnica (2 pagine), Istruzioni per l'installazione (9 pagine), Manuale di configurazione (2 pagine), Manuale di configurazione (2 pagine)
Stampa la pagina
Miscellaneous Commands (continued)
ESC p m t1 t2
Outputs pulse to Drawer kick-out port.
m = 0, "0": connector pin 2, m = 1, "1": connector pin 5
t1: on time (×2ms), t2: off time (×2ms)
DLE DC4 1 m t
Outputs pulse to Drawer kick-out port in real-time.
m = 0: connector pin 2, m = 1: connector pin 5
t = 1–8: On time / Off time (×100 ms)
GS ( H 6 0 48 48 d1 d2 d3 d4
Transmits process ID specified by (d1, d2, d3, d4) after
execution of prior print or command.
d=32–126: visible character
Send data: 55 + 34 + d1 + d2 + d3 + d4 + NUL
GS I n
Transmits printer ID or printer information.
n
information
1, "1"
Printer model ID
99
2, "2"
Type ID
2: supported Multi-byte character
3: not supported
35
Column emulation
"=#0"+NUL: normal mode
mode
"=#1"+NUL: 42 column mode
65
Firmware version
95+strings+NUL
66
Manufacturer
95+"EPSON"+NUL
67
Printer name
95+"TM-T20"+NUL
68
Serial number
95+Serial number (10 bytes)+NUL
69
Type of mounted
95+strings+NUL
additional fonts
ex.) "KANJI JAPANESE"
GS g 0 0 nL nH
Initialize resettable maintenance counter.
nL + nH×256
counter
20
Number of lines fed
21
Number of head energizations
22
Number of lines fed (after the print
head was replaced)
50
Number of autocutter operations
70
Duration of printer operation
GS g 2 0 nL nH
Transmits value of resettable or cumulative maintenance
counter.
counter
unit
Number of lines fed
lines
Number of head energizations
times
Number of lines fed (after the
lines
print head was replaced)
Number of autocutter operations times
Duration of printer operation
hours
Send data: 95 + Value + NUL
Value: "0"–"9999999999" (1–10 bytes length)
GS ( K 2 0 50 m
Selects print speed.
m = 0, "0": speed customized by GS ( E (fn = 5, a = 6)
m = 1–13 (slow–fast)
Miscellaneous Commands (continued)
ESC ( A 3 0 97 n c
DLE DC4 3 0 0 0 1 0
fn=1
RT
DLE DC4 2 1 8
fn=48
DLE DC4 8 1 3 20 1 6 2 8
Page Mode Commands
send data
Page mode is a free layout mode. Any print data can be put in any place on the
•
print area and be printed by FF or ESC FF command.
ESC L
ESC S
depends on firmware
FF
ESC FF
depends on printers
ESC W xL xH yL yH dxL dxH dyL dyH
unit
lines
times
lines
times
ESC T n
hours
nL + nH×256
resettable cumulative
20
148
GS $ nL nH
21
149
22
150
50
178
GS \ nL nH
70
198
fn=50
CAN
Sounds optional external buzzer.
n specifies the sound pattern. (n = 1–7)
c specifies the repeat times. (c = 0: infinitely)
Stops sounding optional external buzzer and transmits 4
bytes: 55, 84, 64, 0.
Executes printer power-off sequence and transmits 3
bytes: 59, 48, 0.
Clears both receive and print buffers, and transmits 3
bytes: 55, 37, 0, as the Clear response.
Switches from standard mode to page mode.
Switches from page mode to standard mode.
Prints all data and switches from page mode to standard
mode.
Prints all data in page mode. After printing, the printer
does not clear the buffered data, the print position, and
values set by other commands.
Sets the print area size and the logical origin in page
mode.
xL + xH×256, yL + yH×256: position of the logical origin
dxL + dxH×256: width of the print area
dyL + dyH×256: height of the print area
Selects the print direction and the starting position in
page mode.
n
print direction
starting position
0, "0"
left to right
upper left
1, "1"
bottom to top
lower left
2, "2"
right to left
lower right
3, "3"
top to bottom
upper right
In page mode, moves the vertical print position from the
starting position set by ESC T.
nL + nH×256: absolute print position
In page mode, moves the vertical print position from the
current position.
nL + nH×256: relative print position (-32,768–32,767)
Cancels print data in page mode.
Other Commands
For details, refer to TM-T20 product specification or ESC/POS Application
•
fn=97
Programming Guide for Paper Roll Printers.
OC
: obsolete command
•
Character Commands
fn=3
RT
ESC !
Selects character font and styles.
Miscellaneous Commands
fn=2
RT
GS P
Sets horizontal and vertical motion units.
GS ( A
Executes test print.
Bit Image Commands
fn=8
RT
GS v 0
Prints raster bit image
NV Bit Image Commands
FS q
Defines NV bit image in NV graphics area.
FS p
Prints NV bit image defined by FS q.
Downloaded Bit Image Commands
GS
∗
Defines downloaded bit image.
GS /
Prints downloaded bit image defined by GS ∗
Status Commands
ESC u
Transmits peripheral device status as 1 byte.
ESC v
Transmits status of paper sensor as 1 byte.
Mechanism Control Commands
ESC i
Executes paper cut.
ESC m
Executes paper cut.
Customize Commands
FS g 1
Writes data to NV user memory.
FS g 2
Transmits data in NV user memory.
User Setup Commands
GS ( E
(fn=1)
Enters User setting mode and transmits the mode
change notice.
GS ( E
(fn=2)
Ends User setting mode and performs software
reset.
GS ( E
(fn=3)
Sets memory switch setting values.
GS ( E
(fn=4)
Transmits memory switch setting values.
GS ( E
(fn=5)
Sets customized setting values.
GS ( E
(fn=6)
Transmits customized setting value.
GS ( E
(fn=11)
Sets configuration item for serial interface.
GS ( E
(fn=12)
Transmits configuration value.
GS ( E
(fn=15)
Selects configuration item: Class of USB interface.
GS ( E
(fn=16)
Transmits configuration value for Class of USB
interface.
OC
OC
OC
OC
OC
OC
OC
OC
OC
OC
OC