Epson TM-T88IV ReStick Manuale - Pagina 3

Sfoglia online o scarica il pdf Manuale per Etichettatrice Epson TM-T88IV ReStick. Epson TM-T88IV ReStick 10. Receipt restick printer in windows using an ethernet connection
Anche per Epson TM-T88IV ReStick: Opuscolo (2 pagine), Specifiche tecniche (2 pagine), Manuale d'uso (15 pagine), Manuale d'uso (9 pagine), Nota tecnica (8 pagine), Manuale passo passo per l'installazione (14 pagine), Bollettino tecnico (5 pagine), Manuale d'uso (20 pagine)

We commonly use the following 'Null Modem' arrangement with good results:

Tip: If unsure on which cable to use, first try a standard Null Modem cable.

Getting Initial Printer and Connect-it Adapter Settings - the Self Test

Print the initial settings of the serial adapter by running the self test. Run the printer self test

by holding down the feed button while turning on the printer. The printer will print a list of

initial settings including baud rate, data bits, parity, stop bit, flow control (handshaking).

These values will be needed when configuring the serial port in Windows.

Configuring the Computer

Check the POS application to determine what the port settings should be on the computer.

The POS application and the printer must have the same baud rate, data bits, parity, stop bit

for the printer to print legibly. Also the handshaking must be set the same for the printer to

print at all.

D-Sub 25 (TM)

2 TxD connected to 2 RxD

3 RxD connected to 3 TxD

20 DTR connected to 6 DSR

20 DTR connected to 8 CTS

6 DSR connected to 4 DTR

7 GD connected to 5 GD

D-Sub 9(PC)