Epson 2000P - Stylus Photo Color Inkjet Printer Informazioni sul prodotto - Pagina 12

Sfoglia online o scarica il pdf Informazioni sul prodotto per Software Epson 2000P - Stylus Photo Color Inkjet Printer. Epson 2000P - Stylus Photo Color Inkjet Printer 13. Product support bulletin(s)
Anche per Epson 2000P - Stylus Photo Color Inkjet Printer: Manuale di configurazione (17 pagine), Sostituzione delle cartucce (2 pagine), Bollettino di assistenza prodotti (6 pagine), Bollettino di assistenza prodotti (1 pagine), Specifiche tecniche (1 pagine), Manuale d'uso (12 pagine), Bollettino di assistenza prodotti (3 pagine), Bollettino di assistenza prodotti (2 pagine), Bollettino di assistenza prodotti (4 pagine), Bollettino di assistenza prodotti (7 pagine), Manuale di avvio rapido (2 pagine), Manuale di istruzioni per l'installazione (8 pagine)

EPSON Stylus Photo 2000P

4. Hold down the yellow ink cartridge replacement button,

and then turn on the printer by pressing the Ppower

button. Continue holding down the yellow button until

you see all three control panel lights flashing.

5. Press the E load/eject button. A sheet of paper feeds into the

printer (under the paper eject rollers) and the rollers turn

slowly.

6. Wipe off ink from the rollers using the dampened cleaning

tool as shown.

If the paper ejects before you finish cleaning, press the

E load/eject button to feed another sheet into the printer.

7. When you're finished, turn the printer off.

Transporting the Printer

If you move your printer some distance, you need to prepare it

for transportation in its original box or one of a similar size.

To avoid damage, always leave the ink cartridges

installed when transporting the printer.

Be sure to remove the tape used in step 4 after installing

the printer in its new location.

Follow these steps:

1. Turn on the printer, wait until the print head locks in the

far right position, then turn off the printer.

2. Unplug the power cord from the electrical outlet. Then

disconnect the printer cable from the printer.

3. Remove any paper from the printer and remove the paper

support.

12 - EPSON Stylus Photo 2000P

4. Open the printer cover. Secure the ink cartridge holder to

the printer with tape as shown, then close the printer cover.

5. Push in the output tray extensions and close the tray.

6. Repack the printer and attachments in the original box

using the protective materials that came with it. See the

unpacking sheet that was packed with your printer.

Be sure to keep the printer level as you transport it.

After transporting the printer, remove the tape securing the

print head and test your printer. If you notice a decline in

print quality, clean the print head (see page 9); if output is

misaligned, align the print head (see page 11).