Epson 7850p - PowerLite XGA LCD Projector Manuale informativo sul prodotto - Pagina 5

Stampa la pagina

Epson 7850p - PowerLite XGA LCD Projector Manuale informativo sul prodotto

EPSON PowerLite 7850p Projector

Connecting the Projector

You can connect the projector to three computer sources or

four video sources—up to a total of four sources. You can

include an independent sound channel for each source. (See

the User's Guide for complete setup instructions.) Using

EasyMP,

you can also connect over a wireless network, or

view images on a memory card or digital camera.

Note: The preview feature lets you see all the sources at a glance,

so you can easily switch among them. See page 5.

Types of Connections

The following connections are possible, depending on the

signal your equipment generates and its available output ports.

Computer equipment

Output signal

Required cable

VGA cable

Analog RGB video

BNC cable

VGA-to-BNC cable

DVI-D dual-link cable (DVI-to-DVI or

DVI

DFP-to-DVI, available from EPSON; see

page 24)

Video equipment

Output signal

Required cable

Composite video

RCA video cable

S-video

S-video cable

Component video—

BNC cable

NTSC (YCbCr)

Component video—

BNC cable

HDTV (YPbPr)

VGA cable

RGB video

BNC cable

Note that the projector's

Computer

variety of input signals. If you're connecting to one of these

ports, you'll need to make sure that the correct input signal

setting is selected, or your image won't display properly.

To change the input signal setting, do the following:

1. After turning on the projector, press the

menu screen appears.

2. Select the

menu.

Setting

3. Change the

Computer Input

needed to match the signal generated by your computer or

video equipment. (See the User's Guide for more

information.)

EPSON PowerLite 7850p Projector

and

ports accept a

BNC

button. The

setting as

BNC Input

Playing Sound Through the Projector

You can play sound through the projector's speaker system or

you can attach an external speaker system.

To play sound through the projector, use one of the following

cables that came with your projector:

❏ If you have a computer or video equipment connected to

the

Computer

Connect one end to the correct audio port (see below), and

the other end to the audio-output connector on your

equipment.

❏ If you have a computer or video equipment connected to

the

ports, or to the

BNC

the RCA-style audio cable. Connect one end to the jack

corresponding to the connected port, and the other end to

the audio-output connector on your equipment.

Use to connect external

speakers

Use with Video

connection

To connect external speakers, use the

back of the projector. You may be able to use a commercially

available audio cable with a stereo mini-jack connector on one

end and pin jacks on the other, or you may have to purchase a

special cable or use an adapter, depending on your stereo

system. See the User's Guide for more information.

Using the Remote Control as a Wireless

Mouse

If you've connected a computer to the projector, you can

use the projector's remote control as a wireless mouse by

connecting the USB cable that came with the projector to

the projector's

Type B

is supported on systems with a USB port running Windows

XP, 98, 2000, or Me, or Macintosh OS 8.6 to OS X 10.2. See

the User's Guide for more information.

6/03

port, use the stereo mini-jack cable.

DVI

port, use the

Video

S-Video

Use with BNC connection

Use with S-video

Use with Computer or

connection

DVI connection

Audio Out

USB port. The wireless mouse function

port on the