Epson 7850p - PowerLite XGA LCD Projector Manuale informativo sul prodotto - Pagina 9

Stampa la pagina

Epson 7850p - PowerLite XGA LCD Projector Manuale informativo sul prodotto

EPSON PowerLite 7850p Projector

Note: The image will be slightly shorter after adjusting. If it's

important to maintain the correct aspect ratio, use the menu

system to perform keystone correction, as described below,

then adjust the Height setting as needed.

❏ Press the

button on the remote control, select the

menu, and press

Setting

select

in the Keystone menu and press

H/V-Keystone

. Select

Enter

V-Keystone

(for horizontal keystone distortion) and

H-Keystone

press

. Use the

Enter

control to adjust the keystone setting as needed.

Using Quick Corner

Use Quick Corner to correct the image shape when it's

uneven on all sides.

1. Press the

button on the remote control (or on the

projector's control panel).

2. Select the

menu and press

Setting

3. From the Setting menu, select

4. Select

and press

Quick Corner

You see this screen:

5. Press the

button to

Enter

select the corner you want to

adjust.

6. Use the

pointer button on

the remote control (or the

arrow buttons on the

projector) to adjust the shape.

7. Repeat steps 5 and 6 as needed

to adjust any remaining

corners.

8. When done, press the

exit the menu system.

remains selected in the Keystone menu, the

Quick Corner

Quick Corner screen appears whenever you press the

projector's

buttons. You can then follow steps 5

Keystone

through 8 above to correct the shape of your image, or press

to exit Quick Corner.

ESC

EPSON PowerLite 7850p Projector

. From the Setting menu,

Enter

(for vertical keystone distortion)

pointer button on the remote

Enter

and press

Keystone

Enter

[

]:Adjust

Adjust

[

]

:Move next

[ESC] :Return (Press 1 second to

[ESC]

:Return (Press 1 second to

reset)

button on the remote control to

ESC

Correcting Computer Images

If you've connected a

computer and the image

doesn't look right or fit

properly on the screen, press

the

button on the

Auto

remote control (or the

Auto/Enter

projector's control panel).

This automatically resets the projector's tracking, sync,

resolution, and position settings.

Note: You must be projecting an image for this button to have

any effect. The

If vertical stripes appear in the projected image and the

button doesn't correct the problem, hold down the

button on the projector's control panel while pressing either

the

Tracking +

Enter

If the image appears fuzzy or flickers and the

doesn't correct the problem, hold down the

pressing either the

Note: Also make sure you have selected the correct Computer or

BNC Input option in the Setting menu for your computer. See the

User's Guide for more information.

6/03

button on the

button works only with computer images.

Auto

or the

button.

Tracking –

button.

Sync +

Sync –

Auto

button

Auto

Shift

button

Auto

button while

Shift