Epson 7900p - PowerLite XGA LCD Projector Informazioni sul prodotto - Pagina 18

Sfoglia online o scarica il pdf Informazioni sul prodotto per Software Epson 7900p - PowerLite XGA LCD Projector. Epson 7900p - PowerLite XGA LCD Projector 24. Supplemental / late breaking information
Anche per Epson 7900p - PowerLite XGA LCD Projector: Manuale d'uso (42 pagine), Manuale operativo (36 pagine), Parti di ricambio (1 pagine), Impostazione rapida (2 pagine), Manuale d'uso (1 pagine), Breve descrizione tecnica (7 pagine), Bollettino di assistenza prodotti (7 pagine), Installazione della lente (5 pagine)

Stampa la pagina

Epson 7900p - PowerLite XGA LCD Projector Informazioni sul prodotto

Epson PowerLite 7900p Projector

Using EMP NetworkManager

You can use EMP NetworkManager to configure the projector

to send out messages by e-mail, notifying you when a problem

occurs with the projector. Before running EMP

NetworkManager, make sure you've installed the software as

described in the User's Guide. Then follow the steps below to

create e-mail settings for each projector you want to monitor.

Selecting the Projectors to Monitor

1. To start EMP NetworkManager, click

Programs

All Programs > EPSON Projector >

EMP NetworkManager

You see the EMP NetworkManager screen. The projectors

you've registered through EMP Monitor appear as icons.

2. If you'd like to register a projector manually and you know

its IP address, double-click the

icon.

selection

You see this screen:

3. Enter the projector's IP address and click

projector's icon is added to the EMP NetworkManager

screen.

Epson PowerLite 7900p Projector

Start >

Proj(ector) address

. The

Add

Setting a Password

You can set a password to restrict access to each projector from

EMP NetworkManager:

1. Right-click the icon of the projector whose password you

want to set, then select

2. Enter a password up to 14 characters in length.

Creating the E-Mail Settings

1. If EMP NetworkManager is not already running, open it

from the Start menu. You see your registered projectors:

2. Double-click the icon for the projector whose e-mail

settings you want to create. Enter your password, if you

created one.

3. EMP NetworkManager connects to the projector, and you

see this screen:

Note: The projector must be plugged in (projecting or in

standby mode) for you to be able to connect to it.

To access a projector in standby mode, you must first select

as the

Network ON

projector's Advanced1 menu. (See the User's Guide for

instructions.)

9/04

Change Password

setting in the

Standby Mode