Epson 826W - PowerLite WXGA LCD Projector Manuale introduttivo

Message Broadcasting

Message Broadcasting is a plug-in for EMP Monitor. Administrators

can use the plug-in to send messages or announcements to one or

more projectors or all the projectors on the network. You can send

messages manually, or use the Timer function in EMP Monitor to

have messages sent automatically.

You can use Message Broadcasting to send images in JPEG format.

The maximum resolution for an image is 1920 × 1200 pixels.

Getting Started

Before you install the Message Broadcasting plug-in, make sure EMP

Monitor (version 4.30 or later) is installed, and your projectors are

registered in EMP Monitor. Make sure your projectors support

Message Broadcasting; check epson.com/support if necessary.

Follow the instructions on the Epson website for downloading and

installing.

You need to use a networked Windows computer running Windows

Vista

, XP, or 2000 Professional to install the plug-in.

If any of the projectors you select are switched off, they will power on

automatically when you begin Message Broadcasting. For network

communication, make sure the

setting in the

Standby Mode

projectors' Extended menu is set to

Communication On

Message Broadcasting