Epson EX3220 Impostazione rapida

Sfoglia online o scarica il pdf Impostazione rapida per Software Epson EX3220. Epson EX3220 4. Svga 3lcd projector
Anche per Epson EX3220: Manuale operativo (48 pagine), Panoramica e specifiche del prodotto (4 pagine), Opuscolo e specifiche (4 pagine)

Stampa la pagina

1. Turn on Your Equipment

EX3220/EX5220/EX6220/EX7220

Quick Setup

Before using the projector, make sure you read the safety instructions in the

online User's Guide.

Connect the projector

Choose from the following connections. See the sections below or the online

User's Guide for details.

Computer

USB port

Connect the square end of a USB cable to the projector's USB-B (square) port.

Connect the flat end of the cable to any USB port on your computer.

Windows

XP or later: After turning on the projector, follow the

on-screen instructions to install the Epson

(EMP_UDSE.EXE; only on first connection). If the software screen does not

display automatically, open My Computer or Computer, then double-click

EPSON_PJ_UD.

Mac OS X 10.5.8 or higher: After turning on the projector, the setup folder

for USB Display appears in the Finder. Double-click USB Display Installer and

follow the on-screen instructions to install the Epson USB Display software

(only on first connection).

Note: If you have problems installing the USB Display software, make sure the

USB Type B setting in the projector's Extended menu is set to USB Display.

See the online User's Guide for instructions.

VGA port

Connect one end of a VGA cable to the projector's Computer port, and the

other end to your computer's

switch it to external display (see "Troubleshooting"). You can also connect an

audio cable.

HDMI port

Connect one end of an HDMI cable to the projector's HDMI port and the other

end to an HDMI port on your computer.

Video device

Connect up to 4 video devices and use the remote control to switch between

them.

USB cable

HDMI cable

VGA cable

Audio cable

USB Display software

monitor port. If you are using a laptop,

Audio cable

S-Video cable

HDMI cable

Component video to VGA cable

RCA video cable (composite video)

Camera, USB device, or Epson DC-06 document camera

Connect a digital camera, USB flash drive, USB storage device, or Epson DC-06

document camera to the projector's USB-A (flat) port.

If you connect a digital camera, USB flash drive, or USB storage device, you can

use the projector's PC Free feature. See the online User's Guide for details.

Turn on your equipment

Turn on your computer or video source.

Plug in the projector. The

light on the projector turns blue.

Open the A/V Mute slide all the way.

Press the

power button.

The projector beeps, the Status

light flashes blue, and then

stays on.

Note: To shut down the projector, press the

unplug it. You don't have to wait for the projector to cool down.

The default language of the menu system is English. To select another

language, press the Menu button on the projector. Select Extended and

press Enter. Select Language and press Enter. Select your language and

press Enter. Press the Menu button to exit the menu system.

Adjust the image

If you don't see an image, press the Source Search button on the

projector or remote control to select the image source.

Note: If you still see a blank screen or have other display problems, see

the troubleshooting tips on the back of this sheet.

To raise the image, press the

foot release button and lift

the front of the projector.

Release the button to lock

the foot in position.

power

power button twice, then