Epson FX-2190 Manuale d'uso - Pagina 39

Sfoglia online o scarica il pdf Manuale d'uso per Software Epson FX-2190. Epson FX-2190 48. Impact printers
Anche per Epson FX-2190: Specifiche tecniche (2 pagine), Manuale (11 pagine), Manuale di configurazione (2 pagine), Manuale informativo sul prodotto (19 pagine), Specifiche tecniche (2 pagine), Riferimento rapido (12 pagine), Inizia qui (2 pagine)

Setting

Auto CR (available in IBM

PPDS emulation mode)

IBM character table

Default-setting mode

Follow the steps below to enter the default-setting mode. If you use

single sheets, you need to load a new sheet of paper each time the printer

ejects a printed page.

Make sure the printer is on and paper is loaded. Then press the

buttons (Item

Tear Off/Bin lights turn on.

The printer enters default-setting mode and prints a line showing

which language is currently selected for printing the instructions.

The selected language is underlined.

If you want a different language, press the Item

printout shows the language you want underlined.

Press the Set button to accept the language. The printer prints a line

asking if you want to print all the current settings.

To print a list of all the current settings, press the Set button. The

printer prints all the settings and then the first setting again. Go to

step 5.

To go through the settings one at a time, press the Item D or Item U

button. The printer prints the first setting and its current value.

Press the Set button to scroll through the options for the selected

setting until you see the one you want.

Press the Item D or Item U button to select the next or previous

setting you want to change.

Repeat step 5 for any other settings you want to change.

When you finish, press the Menu buttons again to exit

default-setting mode.

Your new settings become the printer's defaults.

Options (default in bold)

Off, On

Table 2, Table1

and Set ) until the printer beeps and both the

button until the

Using the Control Panel