Epson LQ-2090 Manuale d'uso - Pagina 45

Sfoglia online o scarica il pdf Manuale d'uso per Software Epson LQ-2090. Epson LQ-2090 48. Epson lq-2090: product brochure
Anche per Epson LQ-2090: Manuale (11 pagine), Riferimento rapido (12 pagine), Specifiche tecniche (2 pagine), Specifiche tecniche (2 pagine), Specifiche tecniche (4 pagine)

Chapter 5

Product Information

This symbol is placed on the print head and other parts to indicate that

they may be hot. Never touch those parts just after the printer has been

used. Let them cool for a few minutes before touching them.

Read all of these safety instructions before using the printer. In addition, follow

all warnings and instructions marked on the printer itself.

Do not place the printer on an unstable surface or near a radiator or heat

source.

Place the printer on a flat surface. It will not operate properly if it is tilted or

placed at an angle.

Do not block or cover the slots and openings in the printer's cabinet, and do

not insert objects through the slots.

Use only the type of power source indicated on the printer's label.

Connect all equipment to properly grounded electrical outlets. Avoid using

outlets on the same circuit as photocopiers or air control systems that

regularly switch on and off.

Do not use a damaged or frayed power cord.

If you use an extension cord with the printer, make sure the total ampere

rating of all devices plugged into the extension cord does not exceed the

cord's ampere rating. Also, make sure the total ampere of all devices

plugged into the electrical outlet does not exceed the electrical outlet's

ampere rating.

Unplug the printer before cleaning it, and always clean it with a damp cloth

only.

Do not spill liquid onto the printer.

Except as specifically explained in the user documentation, do not attempt

to service the printer yourself.

Unplug the printer and refer servicing to qualified service personnel under

the following conditions: if the power cord or plug is damaged, if liquid has

entered the printer, if the printer has been dropped or damaged, if it does

not operate normally or exhibits a distinct change in performance.

Adjust only those controls that are covered by the operating instructions.

Product Information