Toshiba 18E2KVG-A Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Condizionatore d'aria Toshiba 18E2KVG-A. Toshiba 18E2KVG-A 12.

Stampa la pagina

COMFORT SLEEP OPERATION

For comfortable sleep, automatically control air fl ow and automatically turn OFF

(Except in DRY mode).

1. Press

: Select 1, 3, 5 or 9 hrs for OFF timer operation.

2. Press

to cancel the comfort sleep operation.

Note: The cooling operation, the set temperature will increase automatically

1 degree/hour for 2 hours (maximum 2 degrees increase). For heating

operation, the set temperature will decrease.

POWER-SELECTION AND SILENT

OPERATION (OUTDOOR UNIT)

Power-Selection

This function is used when the circuit breaker is shared with other electrical

appliances. It limits the maximum current and power consumption to 100%, 75%,

or 50% and can be implemented by POWER-SELECTION. The lower percentage,

the higher saving and also longer compressor lifetime.

Note:

When the level is selected, POWER-SEL level fl ashes on remote LCD

●

display for 3 seconds.

In case of 75% and 50% level, number "75" or "50" also fl ashes for 2

seconds.

Due to the reason that POWER-SELECTION function limits the

●

maximum current, inadequate cooling or heating capacity may occur.

Silent Operation

Keep outdoor unit operating silently to ensure either yourself or neighborhood

will have a tight sleep in nighttime. By this feature, the heating capacity will be

optimized to deliver such silent experience. The silent operation can be selected

from one of two purposes (Silent 1 and Silent 2).

There are three setting parameters: Standard level > Silent 1 > Silent 2

Silent 1:

Though operating silently, the Heating (or Cooling) capacity is still prioritized to

ensure having suffi cient comfort inside the room.

This setting is a perfect balance between the Heating (or Cooling) capacity and

the Sound level of outdoor unit.

Silent 2:

Compromising the Heating (or Cooling) capacity to the Sound level in any

circumstance where the outdoor unit's sound level is highly prioritized.

This setting has a purpose to reduce the maximum sound level of outdoor unit by

4 dB(A).

Note:

While activating of Silent operation, inadequate heating (or cooling)

●

capacity may occur.

Power-Selection and Silent Operation (Outdoor Unit)

[100%]

TIMER OPERATION

Set the timer when the air conditioner is operating.

Setting the ON Timer

Press

: Set the desired

ON timer.

Press

: Set the timer.

Press

: Cancel the timer.

Note:

●

Keep the remote control in accessible transmission to the indoor unit;

otherwise, the time lag of up to 15 minutes will occur.

●

The setting will be saved for the next same operation.

[75%]

[50%]

SILENT#2

SILENT#1

Setting the OFF Timer

Press

: Set the desired

OFF timer.

Press

: Set the timer.

Press

: Cancel the timer.

PRESET OPERATION

Set your preferred operation for future use. The setting will be memorized by

the unit for future operation (except airflow direction).

1. Select your preferred operation.

2. Press and hold

The

mark displays.

3. Press

: Operate the preset operation.

DISPLAY LAMP BRIGHTNESS ADJUSTMENT

To decrease the display lamp brightness or turn it off.

1. Press and hold

) is shown on remote control LCD then release the button.

2. Press

Rise

Decrease

Remote control

LCD

Lamp illuminates full brightness.

Lamp illuminates 50% brightness.

Lamp illuminates 50% brightness and the

operation lamp is turned off.

All lamps are turned off.

●

In the examples of

and

going off.

AUTO RESTART FUNCTION SETTING

This product is designed so that, after a power failure, it can restart

automatically in the same operating mode as before the power failure.

Information

The product is shipped with Auto Restart function in the ON position.

Turn it OFF if this function is not required.

How to turn OFF the Auto Restart Function

• Press and hold the [OPERATION] button on the indoor unit for 3 seconds

(3 beep sounds but OPERATION lamp does not blink).

How to turn ON the Auto Restart Function

• Press and hold the [OPERATION] button on the indoor unit for 3 seconds

(3 beep sounds and OPERATION lamp blink 5 time/sec for 5 seconds).

Note:

• In case of ON timer or OFF timer are set, AUTO RESTART OPERATION

does not activate.

• Default setting of AUTO RESTART OPERATION is ON.

SELF CLEANING OPERATION

(COOL AND DRY OPERATION ONLY)

To protect bad smell caused by the humidity in the indoor unit.

1. If the

button is pressed once during "Cool" or "Dry" mode,

the fan will continue to run for other 30 minutes, then it will turn off

automatically. This will reduce the moisture in the indoor unit.

2. To stop the unit immediately, press the

30 seconds.

for 3 seconds to memorize the setting.

for 3 seconds until brightness level (

to adjust brightness in 4 levels.

Operation display

All turned off

, the lamp illuminates for 5 seconds before

more 2 times within

Brightness

100%

50%