Epson PowerLite 735c Manuale d'uso - Pagina 24

Stampa la pagina

note

Use the up and down

buttons on the remote

control to enter letters and

numbers. You will also see

punctuation marks, such as

a period (.) and symbols,

such as @. When you see the

letter or symbol you want,

press

. Then press the

Enter

right arrow to move to the

next position. To correct a

mistake, press the left arrow

to return to the previous

position.

You see the following screen:

6. For Mail Notification Settings, select

remote control.

7. Highlight the

IP address of SMTP server

The outline of the box turns green to indicate you are in input

mode. You can enter numbers between 0 and 255. However, you

cannot use the following IP addresses: 255.255.255.255,

224.0.0.0, or 127.x.x.x (where x is a number between 0 and 255).

8. Highlight the

Port Number

SMTP server port number. The default value is 25, but you can

enter numbers between 1 and 65535.

9. Highlight the box for

Enter the e-mail address for the first computer that you want to

receive e-mail alerts. You can enter a maximum of 53 single-byte

alphanumeric characters.

10. If you want to send e-mail alerts to one or two other computers,

enter addresses for those computers in

and

Destination address 3

11. Select the conditions under which an e-mail alert will be sent.

and press

box and press

Enter

Destination address 1

Destination address 2

on the

Enter

. Then enter the

and press

Enter