Epson PowerLite 737c Informazioni sul prodotto - Pagina 4

Stampa la pagina

Epson PowerLite 737c Informazioni sul prodotto

Epson PowerLite 737c Projector

3. Press the P

button on top of the projector or on the

Power

remote control.

Projector

The projector beeps once and the P

green as the projector warms up, then an image begins to

appear. When the P

Power

green, the projector is ready for use.

Warning:

Never look into the lens when the lamp is on. This can damage

your eyes, and is especially dangerous for children.

❏ If you've connected a Windows

projector, you may see a New Hardware Wizard saying

your computer has found a plug-and-play monitor; if so,

click

Cancel

❏ If you don't see the image you want, press the

button on the projector or the

the remote control until you see the image you want to

project.

❏ If you are prompted to enter a password, see "Starting the

Projector with a Password" on page 10.

Note:

You can also use the Source buttons on the remote control to

switch between devices connected to the ports identified on each

button. For details, see page 5.

If a projected image fails to appear, see "What To Do If You See

a Blank Screen" in the next column.

When you're done with your presentation, shut down the

projector as described on page 7. Shutting down the projector

correctly prevents premature lamp failure and possible damage

from overheating.

Epson PowerLite 737c Projector

Power button

Remote control

light flashes

Power

light stops flashing and remains

-based computer to the

Source

button on

What To Do If You See a Blank Screen

If you see a blank screen or the

on your computer or video source, try the following:

❏ Make sure the cables are connected correctly.

❏ Make sure the P

Power

the lens cover is off.

❏ Press the

Source Search

button on the remote control repeatedly until you

see the image you want to project. See page 5 for more

information about selecting the image source.

If you're using a Windows computer:

❏ Hold down the

you display on an external monitor. It may have an icon such

or it may be labelled

for the projector to sync up after pressing it. Check your

computer's manual or online help for details.

On most systems, the

between the LCD screen and the projector, or display on

both at the same time.

❏ Depending on your computer's video card, you might need

to use the Display utility in the Control Panel to make sure

that both the LCD screen and external monitor port are

enabled. See your computer's documentation or online help

for details.

If you're using a Macintosh

You may need to set up your system to display on the projector

screen as well as the LCD screen. Follow these steps:

1. From the Apple menu, select

click

Displays

2. Select

VGA Display

, and make sure

Arrangement

If you're using a Macintosh with OS 8.6 to 9.x:

You may need to set up your system to display on the projector

screen as well as the LCD screen. Follow these steps:

1. From the Apple menu, select

Monitors

Monitors and Sound

2. Click the

Arrange

3. Drag one monitor icon on top of the other.

If the

option isn't available, try selecting one of the

Arrange

Simulscan resolution settings. Click the

necessary, and then select a

seconds for the projector to sync up after making the selection.)

2/05

message after turning

No Signal

light is green and not flashing and

button on the projector or the

key and press the function key that lets

. Allow a few seconds

CRT/LCD

key lets you toggle

CRT/LCD

with OS X:

System Preferences

, click

Color LCD

Arrange

Mirror Displays

, then click

Control Panels

icon.

Monitor

resolution. (Allow a few

Simulscan

, then

is checked.

icon, if