Epson PowerLite 825 Manuale di installazione

Stampa la pagina

Epson PowerLite 825 Manuale di installazione

Epson PowerLite 85/825/826W

note

If a button is pressed longer

than 30 seconds, the remote

control stops operating to

conserve power. When you

release the button, normal

operation resumes.

caution

When replacing batteries,

take the following

precautions:

Replace the batteries as

soon as they run out. If the

batteries leak, wipe away

battery uid with a soft

cloth. If uid gets on your

hands, wash immediately.

Do not expose batteries to

heat or ame.

Dispose of used batteries

according to local

regulations.

Remove the batteries if

you won't be using the

projector for a long period of

time.

Using the Remote Control

Follow these tips for using the remote control:

Point the remote control at the front of the projector or at the

screen.

Stand within 20 feet of the projector.

Avoid using the remote under bright uorescent lamps or in

direct sunlight, or the projector may not respond properly.

Replacing the Batteries

Replace the batteries as described below:

1. Turn the remote control over.

2. Press the tab on the battery cover

to open it.

3. Install two AA batteries,

inserting the

and

–

as shown.

4. Close the cover, pressing it down

until it snaps into place.

INSTALLATION HANDBOOK

ends

Remote Control Information