Epson PowerLite 8300i with EasyMP.net module Manuale operativo - Pagina 9

Sfoglia online o scarica il pdf Manuale operativo per Software Epson PowerLite 8300i with EasyMP.net module. Epson PowerLite 8300i with EasyMP.net module 47. Release of check tool for network projectors v1.00 for windows
Anche per Epson PowerLite 8300i with EasyMP.net module: Manuale d'uso (42 pagine), Manuale operativo (36 pagine), Impostazione rapida (2 pagine), Bollettino di assistenza prodotti (27 pagine), Manuale rapido (20 pagine), Elenco delle parti (1 pagine), Manuale supplementare (2 pagine), Opuscolo e specifiche (2 pagine), Manuale d'uso (1 pagine), Bollettino di assistenza prodotti (25 pagine), Bollettino di assistenza prodotti (22 pagine), Bollettino di assistenza prodotti (28 pagine), Bollettino di assistenza prodotti (41 pagine), Bollettino di assistenza prodotti (34 pagine), Bollettino di assistenza prodotti (28 pagine), Bollettino di assistenza prodotti (15 pagine), Bollettino di assistenza prodotti (22 pagine), Impostazione rapida (2 pagine)

Installing EasyMP Monitor

From here, continue with the installation by following the

on-screen messages.

Limitations imposed by a Windows Vista or

Windows 7 environment

When using EasyMP Monitor under Windows Vista or Windows 7, note

the following limitations.

• You must have administrator authority in order to use Register at

startup on the Environment setup screen of EasyMP Monitor. s

• If EasyMP Monitor is installed on your computer, uninstall it before

you update the operating system to Windows Vista or Windows 7.

Updating your OS without uninstalling the software may cause a

malfunction. s

p.46

Check the following points before starting up EasyMP Monitor.

• EasyMP Monitor must be installed on the computer to be used for

monitoring and control.

• The computer and the projectors must be connected to the network.

• If using Windows 2000/Windows NT4.0/Windows XP/Windows

Vista/Windows 7, the computer must be started up in Administrator

mode.

• Depending on the projector model, a commercially-available serial W

TCP/IP conversion adapter and a connection cable are required in

order to use EasyMP Monitor. s Projector's User's Guide

Make the settings for the serial W TCP/IP conversion adapter before

connecting to the projector.

p.27