Toshiba 19A30 Manuale di servizio - Pagina 12

Sfoglia online o scarica il pdf Manuale di servizio per TV Toshiba 19A30. Toshiba 19A30 43.

1. ENTERING TO DESIGN MODE

1) Select the Service mode.

When QA02 is initialized, items "OPT0" and "OPT1" of DESIGN MODE are set to the data of the representative model of this

chassis family.

Therefore, because ON-SCREEN specification remains in the state of the representative of model. This model is required to

reset the data of items "OPT0" and "OPT1".

2. SELECTING THE ADJUSTING ITEMS

Every pressing of CHANNEL t button in the design mode changes the adjustment items in the order of table-3.

(s button for reverse order)

Refer to table-3 for data of design mode.

(See SETTING & ADJUSTING DATA on page 17)

3. ADJUSTING THE DATA

Pressing of VOLUME s or t button will change the value of data.

DESIGN MODE

2) While pressing RECALL button on

Remote and press MENU button on TV.

(Design mode)

– 11 –

3) Press MENU button on TV.

ITEM

Press

DATA

Press

(Adjustment mode)