Epson PowerLite D6250 Manuale di installazione

Sfoglia online o scarica il pdf Manuale di installazione per Software Epson PowerLite D6250. Epson PowerLite D6250 4. Air filter and vent maintenance
Anche per Epson PowerLite D6250: Manuale di configurazione rapida (4 pagine), Manuale operativo (50 pagine), Dichiarazione di conformità (4 pagine), Opuscolo (6 pagine), Manuale di manutenzione (4 pagine), Manuale di installazione (4 pagine), Manuale di installazione (3 pagine)

Epson PowerLite D6150 /

D6155W / D6250

Projector Lamp Maintenance

The projector keeps track of the number of hours the lamp is used and displays this information in the

projector's menu system.

Replace the lamp as soon as possible when the following occurs:

• The projected image gets darker or starts to deteriorate

• A message appears when you turn on the projector telling you to replace the lamp

• The projector's lamp light is flashing orange

Replacing the Lamp

Before you replace the lamp, let the projector cool down for at least one hour.

Warning: Let the lamp fully cool before replacing it to avoid injury.

You can replace the lamp while the projector is mounted to the ceiling, if necessary.

1. Turn off the projector and unplug the power cord.

2. Allow the projector lamp to cool down for at least one hour.

3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp

cover.

Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful

removing any broken glass to avoid injury.

4. Slide the lamp cover out and lift it off.

INSTALLATION HANDBOOK

Maintenance