Manual Tuning, Analogue Fine Tuning
The television can be tuned-in manually using Manual Search feature.
Digital Manual Search
The feature is available for service engineers or
can be used for direct channel entry if the multiplex
channel is known.
•
Select
Manual Search from the Installation menu
and press OK.
•
After selecting search type as
the multiplex or frequency number using the numeric
buttons and press OK button to search.
•
Enter the multiplex number using the numeric
buttons. The television will automatically search
for that multiplex. When the multiplex is found any
channels not currently on the programme list will be
added and the programme information at the top of
the screen will be updated.
•
Repeat as necessary.
22BL702B_22BL704B_MB62_[GB]_(IB_INTERNET)_DVB-T_(3910UK)_10076309_10077187.indd 21
22BL702B_22BL704B_MB62_[GB]_(IB_INTERNET)_DVB-T_(3910UK)_10076309_10077187.indd 21
The television can be tuned-in manually. For example:
if the television cannot be connected to a media
recorder/decoder with a SCART lead or to tune-in a
station on another System.
To allocate a programme position on the television
for a decoder and media recorder: turn the decoder
on, insert a pre-recorded fi lm into the media recorder
and press PLAY, then manually tune.
Digital, you can enter
After selecting search type as Manual Channel
scan, you can use Up or Down button to highlight
an item and then press Left or Right button to set
an option.
Enter the channel number or frequency using the
numeric buttons. You can then press OK button
to search. When the channel is located, any new
channels that are not on the list will be stored.
•
Select
menu by using Up or Down and OK buttons.
Analogue fine tune screen will be displayed.
Analogue Fine Tune feature will not be available if
there are no analogue channels, digital channels
and external sources stored.
•
Press
button to set Fine Tune. When fi nished, press OK
button again.
- 21 -
Analogue Manual Search
Analogue Fine Tune
Analogue Fine Tune from the Installation
OK button to proceed. Use Left or Right
18.05.2012 09:16:20
18.05.2012 09:16:20
Stampa la pagina