Toshiba e-STUDIO 2830c Manuale di informazioni sulla sicurezza - Pagina 7
Sfoglia online o scarica il pdf Manuale di informazioni sulla sicurezza per Stampante All in One Toshiba e-STUDIO 2830c. Toshiba e-STUDIO 2830c 34. Multifunctional digital systems
Stampa la pagina
Notice to Users
After a suitable place has been selected for the installation of the e-STUDIO5520C/6520C/6530C, the e-STUDIO2330C/2820C/
2830C/3520C/3530C/4520C, the e-STUDIO205L/255/305/355/455, or the e-STUDIO555/655/755/855, please do not change it.
Avoid excessive heat, dust, vibration and direct sunlight. Also, provide proper ventilation as the copier emits a small amount of
ozone.
For U.S.A. only
FCC NOTICE
e-STUDIO5520C/6520C/6530C and e-STUDIO555/655/755/855
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 and Part 18 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
e-STUDIO2330C/2830C/3530C/4520C and e-STUDIO205L/255/305/355/455
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
WARNING
Changes or modification made to this equipment, not expressly approved by TOSHIBA TEC or parties authorized by TOSHIBA TEC,
could void the user's authority to operate the equipment.
User Safety
This TOSHIBA Multifunctional Digital Systems does not produce laser radiation hazardous to the user. It is certified as a Class 1
laser product under the U.S Department of Health and Human Services (DHHS) Radiation Performance Standard according to the
Radiation Control Health and Safety Act of 1968 including amendments.
Protective housing and external covers completely confine the laser beam light emitted inside the Multifunctional Digital Systems.
The laser beam cannot escape from the machine during any phase of user operation.
Regulations implemented on August 2, 1976 by the Bureau of Radiological Health (BRH) of the U.S Food and Drug Administration
apply to laser products manufactured from August 1,1976. Laser products marketed in the United States must comply with these
regulations.
CAUTION
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation
exposure.
Notice to Users
5