Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst Manuale informativo sul prodotto - Pagina 7

Sfoglia online o scarica il pdf Manuale informativo sul prodotto per Software Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst. Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst 16. Warranty statement
Anche per Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst: Scheda tecnica (6 pagine), Come iniziare (13 pagine), Opuscolo e specifiche (6 pagine), Manuale di configurazione (16 pagine), Manuale di riferimento rapido (12 pagine), Manuale di rete (46 pagine), Manuale di installazione (4 pagine), Garanzia limitata (12 pagine)

Stampa la pagina

Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst Manuale informativo sul prodotto

Replacing an Ink Cartridge

The easiest way to check ink levels is from the control panel:

Tip: You can store partially used ink cartridges for up to 6 months.

3sec.

Full

Matte

Black/

Photo

Black

4 Yellow 6 Light Cyan

2 Cyan

3 Vivid Magenta

When the red B ink light is flashing (and

displayed on the LCD panel), the indicated cartridge is almost

expended. Make sure you have a replacement cartridge. When

the light stays on and

REPLACE INK CRTG

cartridge is expended. You must replace the cartridge before

you can continue printing.

You can install any combination of 110 ml and 220 ml

cartridges. It's a good idea to keep a set of expended 110 ml

cartridges on hand at all times in case you need to ship the

printer.

See page 3 for information on selecting the correct

replacement cartridges. Before you start, make sure the printer

is turned on. Then follow these steps to replace an ink

cartridge:

1. Note the color of the cartridge whose light is on or flashing.

This is the cartridge you need to replace.

Caution: Leave the expended cartridge in the printer until you

are ready to replace it. To prevent ink reporting errors, never

replace the ink cartridges with the printer turned off.

2. Press the ink compartment cover to open it.

1 2 3 4 5 6 7 8

Expended

7 Vivid Light

5 Light Black

Magenta

INK LOW

is displayed, the

3. Raise the ink lever to the unlocked position.

4. Remove the expended ink cartridge from the printer. Make

sure you save your first set of expended 110 ml cartridges so

you can use them for transporting the printer if necessary.

Light

WARNING: Do not shake the expended cartridge, or ink may

Black

leak out. If ink gets on your hands, wash them thoroughly with

soap and water. If ink gets in your eyes, flush them immediately

with water.

5. Make sure the replacement cartridge is the correct color,

and remove it from its package.

6. Gently shake the cartridge before installing it.

12/07

Epson Stylus Pro 4880