Toshiba E-Studio 5508AC Manuale di preparazione della carta - Pagina 13

Sfoglia online o scarica il pdf Manuale di preparazione della carta per Stampante All in One Toshiba E-Studio 5508AC. Toshiba E-Studio 5508AC 46.

1.LOADING PAPER

Move the end guide to the trailing edge of the paper while pushing its lower part in the direction

of the arrows.

Check that there is no gap between the paper and the side guides, as well as the paper and the

end guide.

If the gap is too wide, it could cause paper misfeeding, or the paper size could not be correctly detected.

Between the paper and side guides ("A" in the figure):

Make sure there is no gap. (0.5 mm (0.02") or less on one side, 1.0 mm (0.04") or less in total) However, if paper

misfeeding occurs, make a gap.

Between the paper and end guide ("B" in the figure):

Make sure there is no gap. (0.5 mm (0.02") or less)

Change the paper size indicator if required.

Push the drawer straight into this equipment carefully until it comes to a stop.

The paper size is automatically detected.

Loading Paper in Drawers 13