Epson Stylus Pro 4880 Portrait Edition Manuale di riferimento rapido - Pagina 8

Sfoglia online o scarica il pdf Manuale di riferimento rapido per Software Epson Stylus Pro 4880 Portrait Edition. Epson Stylus Pro 4880 Portrait Edition 12. Warranty statement
Anche per Epson Stylus Pro 4880 Portrait Edition: Opuscolo (1 pagine), Scheda tecnica (6 pagine), Opuscolo e specifiche (6 pagine), Manuale di configurazione (16 pagine), Manuale di rete (46 pagine), Manuale di installazione (4 pagine), Manuale informativo sul prodotto (16 pagine), Garanzia limitata (12 pagine)

Epson Stylus Pro 4880 Portrait Edition Manuale di riferimento rapido
Replacing Printer Parts (continued)
Replacing Printer Parts (continued)
4
Hold down the side pin, as shown, then turn the
latch to the right.
5
Release the side pin and carefully remove the cutter
blade.
6
Insert the new cutter blade.
7
Hold down its side pin and secure it with
the latch.
8
Close the top cover. The carriage returns to the home
position and the cutter replacement is complete.

Replacing the Maintenance Tank

You need to replace the Maintenance Tank
(part # C12C890191) when you see MNT TNK FULL
on the LCD display. The ink light also turns red.
Note:
If you are using 220 ml ink cartridges, remove the
four cartrides from the right ink compartment, then close
the compartment cover.
1
Pull out the maintenance tank as shown.
Caution:
Do not tip the tank, or ink may spill out.
2
Place the used tank in the plastic bag included with
the new tank.
3
Insert the new tank.
Note:
If you removed any 220 ml ink cartridges,
replace them after inserting the new
maintenance tank.
7