Philips S Series Manuale d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso per Monitor Philips S Series. Philips S Series 29.
Anche per Philips S Series: Manuale d'uso (29 pagine), Manuale d'uso (31 pagine), Manuale d'uso (30 pagine), Manuale d'uso (31 pagine), Manuale d'uso (31 pagine), Manuale d'uso (31 pagine), Manuale d'uso (30 pagine), Manuale d'uso (31 pagine), Manuale d'uso (28 pagine), Manuale (31 pagine), Manuale d'uso (31 pagine), Manuale d'uso (27 pagine), Manuale d'uso (29 pagine), Manuale d'uso (31 pagine), Manuale d'uso (31 pagine), Manuale d'uso (33 pagine), Manuale (31 pagine), Manuale d'uso (33 pagine), Manuale d'uso (31 pagine), Manuale d'uso (33 pagine)

2. Setting up the monitor

Resolution notification

This monitor is designed for optimal

performance at its native resolution,

2560 x 1440 @ 60 Hz. When the

monitor is powered on at a different

resolution, an alert is displayed on

screen: Use

2560 x 1440 for best results.

Display of the native resolution alert

can be switched off from Setup in the

OSD (On Screen Display) menu.

Physical Function

Tilt

25°

Warning

• To avoid potential screen damage,

such as panel peeling, ensure that

the monitor does not tilt downward

by more than -5 degrees.

• Do not press the screen while

adjusting the angle of the monitor.

Grasp only the bezel.

-5°

2.3 Remove the Base Assembly

for VESA Mounting

Before you start disassembling the

monitor base, please follow the

instructions below to avoid any possible

damage or injury.

1. Place the monitor face down on a

smooth surface. Pay attention not

to scratch or damage the screen.

2. Use your fingers to loosen the screw

located at the bottom of the base

and remove the base from the

stand.

3. Use a screwdriver to remove the

screws on the arm, and then detach

the arm/stand from the monitor.