Philips SignageSolutions BDL5586XL Manuale d'uso - Pagina 5
Sfoglia online o scarica il pdf Manuale d'uso per Monitor Philips SignageSolutions BDL5586XL. Philips SignageSolutions BDL5586XL 40. Videowall display 55" direct led backlight full hd
Anche per Philips SignageSolutions BDL5586XL: Specifiche tecniche (3 pagine), Specifiche tecniche (3 pagine)
Stampa la pagina
Information for U.K. only
(B)
WARNING - THIS APPLIANCE MUST BE EARTHED.
Important:
This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug
(A)
proceed as follows:
1. Remove fuse cover and fuse.
2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type.
3. Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate 3-pin
plug fitted in its place.
If the mains plug contains a fuse, this should have a value of 5A. If a plug without a fuse is used, the fuse
at the distribution board should not be greater than 5A.
NOTE: T he severed plug must be destroyed to avoid a possible shock hazard should it be inserted
into a 13A socket elsewhere.
How to connect a plug
The wires in the mains lead are coloured in accordance with the following code:
BLUE - "NEUTRAL" ("N")
BROWN - "LIVE" ("L")
GREEN & YELLOW - "EARTH" ("E")
1. The GREEN & YELLOW wire must be connected to the terminal in the plug which is marked with
the letter "E" or by the Earth symbol or coloured GREEN or GREEN & YELLOW.
2. The BLUE wire must be connected to the terminal which is marked with the letter "N" or coloured
BLACK.
3. The BROWN wire must be connected to the terminal which marked with the letter "L" or
coloured RED.
Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead
- not simply over the three wires.
v
BDL5586XL