Epson Stylus RIP Manuale d'uso - Pagina 20

Sfoglia online o scarica il pdf Manuale d'uso per Software Epson Stylus RIP. Epson Stylus RIP 43. Epson stylus color 3000: user guide
Anche per Epson Stylus RIP: Manuale di configurazione rapida (4 pagine)

Stampa la pagina
Epson Stylus RIP Manuale d'uso
Caution:
Once you've installed the StylusRIP software, don't move, modify,
or delete any of the files or folders that were created on your hard
disk or the software may not work.
Installing the StylusRIP Software
License in Your Printer
Now that you've installed the StylusRIP software on the
Macintosh computers you will print from, you can update the
printer to enable PostScript printing. Before you begin, make
sure you have set up and tested the printer as described on
page 1-2.
Caution:
You can install the StylusRIP Updater software only one time and
in only one printer. Double check that the printer cable is securely
connected and the printer is operating properly before you begin
the update process or the StylusRIP software will not work.
Check that the StylusRIP Disk 1 diskette is not write-protected
(the tab on the back must be closed), and do not copy the
diskette; you must use the original in the steps below.
1. At the standalone or print server Macintosh, insert the
StylusRIP Disk 1 in the diskette drive. Double-click the
icon in the
Updater
You see a message asking you to verify that the printer is on
and working properly.
Installing the StylusRIP Software
window.
Disk1
1-7