Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C Manuale - Pagina 13
Sfoglia online o scarica il pdf Manuale per Impianto stereo Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C. Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C 31. 3 cd changer with dolby® pro logic processor, five loudspeakers, 320 watts total power
Anche per Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C: Manuale d'uso (31 pagine), Specifiche tecniche (2 pagine)
Stampa la pagina
All manuals and user guides at all-guides.com
MINI HIFI SYSTEM
STANDBY
ON
POWER SAVE
IR SENSOR
CD 1•2•3
BAND
C1 • 2 • 3
BAND
CD
TUNER
SEARCH•TUNING
STOP•CLEAR
PLAY PAUSE
CLOCK/
PROG
DIM
TIMER
BASS
wOOx
PLUS
TECHNOLOGY
Important:
Before you operate the system,
complete the preparation procedures.
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the
system. When the system is switched
on for the first time, the demonstration
mode will start automatically.
Notes:
– During the demonstration, if you press
any source (or standby-on) button, the
system will switch to the respective
mode (or standby).
– When the system is switched to standby
or power save mode, the demonstration
will resume 5 seconds later.
pg 01-31/P88/22-Eng
13
To start the demonstration mode
• Press and hold Ç (on the system only)
DOLBY B NR
LEFT
CENTER
RIGHT
NEWS/TA
SURR
SURR
PRO LOGIC
RDS
TAPE 1•2
CDR/DVD
CD TEXT
Easy Set
TAPE
CDR
AUX
PRESET
PREV
SIDE
NEXT
EASY SET allows you to store all available
radio stations and RDS stations
DUB
A. REV
RECORD
(HSD)
automatically.
1 Press and hold STANDBY ON (on the
TREBLE
LEVEL
To stop the demonstration mode
• Press and hold Ç (on the system only)
for 5 seconds when the system is in
demonstration mode.
™ The demonstration will stop.
™ "DEMO OFF" is displayed.
™ The system will switch to standby
mode.
Notes:
– When the system is switched on from
the main power outlet, the CD carousel
tray may open and close again to
initialize the set.
– Even though the AC power cord is
removed from and reconnected to the
wall socket, the demonstration will
remain off until it is switched on again.
OPERATING THE SYSTEM
2 The system will proceed to set the RDS
time automatically with the stored RDS
for 5 seconds when the system is in
preset station.
standby mode.
• If no RDS station is available in the first
™ The demonstration will begin.
preset station, the program will exit
automatically.
™ After a radio station is found, "EASY
SET" will be displayed and followed
by "TIME".
• When searching RDS time;
™ "SEARCH RDS TIME" will be
displayed.
™ When RDS time is read, "RDS
system only) for 5 seconds ; when the
TIME" will be displayed. The current
system is in standby or demonstration
mode.
time will be displayed for 2 seconds
™ "EASY SET" will be displayed, and
and stored automatically.
followed by "TUNER" and then
Notes:
"AUTO".
– EASY SET will start with the RDS
™ EASY SET will start searching for all
station, if there are still presets
RDS radio stations with sufficient
available, it will continue to store the
signal strength and then followed by
FM, MW and LW bands respectively.
radio stations on FM, MW and LW
– When EASY SET is used, all previously
band respectively. Weak RDS radio
stored radio stations will be replaced.
stations may be stored in later
– The last preset radio station or the first
presets.
available RDS station will appear on the
™ All available RDS and radio stations
display when EASY SET is completed.
with sufficient signal strength will be
– If RDS station does not transmit RDS
stored. Up to 40 presets may be
time within 90 seconds, the program
stored.
will exit automatically and the display
will show " NO RDS TIME ".
3/6/00, 1:26 PM
13
3139 116 19721