Philips 3 DISC SHELF STSYEM W60 FWC3C37 Manuale d'uso - Pagina 25

Sfoglia online o scarica il pdf Manuale d'uso per Impianto stereo Philips 3 DISC SHELF STSYEM W60 FWC3C37. Philips 3 DISC SHELF STSYEM W60 FWC3C37 28. Philips mini hi-fi systems brochure

Stampa la pagina

Tape Deck Operation

"RECORDING ACTIVE" is

displayed.

• A recording is in progress.

™ Stop the recording or wait until it is

finished.

Recording or playback cannot be

made or there is a decrease in

audio level.

• Dirty tape heads, capstans or

pressure rollers.

™ See section on tape deck maintenance

(page 24).

• Magnetic build-up in the record/

playback head.

™ Use demagnetizing tape.

General

System does not react when any

button is pressed.

• Electrostatic discharge.

™ Press STANDBY ON to switch the

system off. Remove the AC power plug

from the wall outlet, then reconnect

the power plug and switch on the

system again.

pg 01-28/C3-35-30/37-Eng 1

TROUBLESHOOTING

No or poor sound.

• Volume is not turned up.

™ Adjust VOLUME.

• The headphones are connected.

™ Disconnect the headphones.

• Speakers are not connected or are

connected wrongly.

™ Check that the speakers are

connected correctly.

™ Make sure the stripped speaker wire is

clamped.

Reversed left and right sound.

• Speakers are connected wrongly.

™ Check the speaker connections and

location.

Lack of bass sound or apparently

imprecise physical location of

musical instruments.

• Speakers are connected wrongly.

™ Check the speaker connection for

proper phasing, colored/black wires to

colored/black terminals.

Remote control has no effect on

the system.

• Wrong source is selected.

™ Select the source (CD, TUNER, etc.)

before pressing the function button,

( É , í , ë , etc.).

• The distance to the system is too

large.

™ Reduce the distance.

• Batteries are inserted incorrectly.

™ Insert the batteries with their polarities

(+/– signs) as indicated.

• Batteries are exhausted.

™ Replace the batteries.

Timer is not working.

• Clock is not set.

™ Set the clock.

• Timer is not switched on.

™ Press CLOCK•TIMER to switch on the

timer.

• Recording is in progress.

™ Stop recording.

Clock setting is erased.

• There was a power failure.

™ Reset the clock.

12/14/99, 9:48 AM

System displays features

automatically; buttons flash

continuously.

• Demonstration mode is switched

on.

™ Press and hold Ç (on the system) for

five seconds to switch off the

demonstration.

All lighted buttons are not lit.

• Display is switch on in DIM 3 mode.

™ Press DIM until DIM OFF display mode

is shown.

3139 116 19372 (ENG)