Toshiba e-STUDIO7518A Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Stampante All in One Toshiba e-STUDIO7518A. Toshiba e-STUDIO7518A 20. Sys board diagnosis tool
Anche per Toshiba e-STUDIO7518A: Manuale di gestione (32 pagine), Manuale dell'operatore (32 pagine)

Stampa la pagina

Introduction

This manual describes the procedure for using the SYS Board Diagnosis Tool.

This tool inspects the parts function of the SYS board, the communication functions

connecting with other boards, and the HDD function.

The setting values saved in the machine, and the software are not erased.

Do not use this tool for other purposes.

Use this tool when any of the following symptoms has occurred:

• The cause of the call for service is not known and replacing the SYS board is

determined (Conditions of the SYS board are checked).

• The equipment does not start (Control Panel is not displayed)

• A call for service related to the SYS board has occurred.

• A call for service related to the HDD has occurred.

• AN "F" series error has occurred.

Target Models

This tool can only be used on the following models. It does not work properly on any

other models.

• e-STUDIO2010AC/2510AC

• e-STUDIO2015C/2515AC/3015AC/3515AC/4515AC/5015AC

• e-STUDIO2018A/2518A/3018A/3518A/4518A/5018A

• e-STUDIO5516AC/6516AC/7516AC

•

e-STUDIO5518A/6518A/7518A/8518A

USB Memory Requirements

A USB memory must be formatted in FAT 32 and meet the following requirements:

• Capacity 1GB above

• USB 2.0 or higher

Note: A USB memory that is 32GB or larger must be formatted with exFAT.