Philips AZ 2045 Manuale d'uso - Pagina 8
Sfoglia online o scarica il pdf Manuale d'uso per Impianto stereo Philips AZ 2045. Philips AZ 2045 12. Cd soundmachine
Anche per Philips AZ 2045: Manuale d'uso (9 pagine), Manuale d'uso (15 pagine), Specifiche tecniche (2 pagine), Manuale (8 pagine), Manuale di servizio (34 pagine), Manuale (10 pagine), (Svedese) Snabbmanual (8 pagine)
Stampa la pagina
CD
3 Press 2; to start playback.
™
if your CD contains non-audio
files
4 To pause playback press 2;. Press 2; again to
resume play.
5 To stop CD playback, press 9.
Note: CD play will also stop when:
– the CD door is opened
– the CD has reached the end
– you select tape or tuner source.
Selecting a different track
• Press ∞ or § on the set, once or repeatedly to
select.
• In the pause/stop position, press 2; to start
playback.
Finding a passage within a track
1 Press and hold ∞ or §.
™ The CD is played at high speed and low volume.
2 When you recognize the passage you want, release
∞ or § to resume normal playback.
Note: During a CD program or if shuffle/ repeat
active, searching is only possible within a track.
Different play modes: SHUFFLE and REPEAT
You can select and change the various play modes
before or during playback, and combine the modes
with PROGRAM.
shuffle – tracks of the entire CD/ program are
played in random order
shuffle and repeat all – to repeat the entire CD/
programme continuously in random order
repeat all – repeats the entire CD/ program
repeat (and shuffle repeat) – plays the current
(random) track continuously
1 To select play mode, press MODE once or more.
2 Press 2; to start playback if in the stop position.
3 To select normal playback, press MODE repeatedly
until the various modes are no longer displayed.
– You can also press 9 to cancel your play mode.
CASSETTE RECORDER
Programming track numbers
In the stop position, select and store your CD tracks in
the desired sequence. Up to 20 tracks can be stored in
the memory.
1 Press ∞ or § on the set to select your desired
track number.
2 Press PROG.
™ If you attempt to programme without first
selecting a track number,
shown.
3 Repeat steps 1-2 to select and store all desired
tracks.
™ Display:
than 20 tracks.
Reviewing the programme
In the stop position, press and hold PROG until the
display shows all your stored track numbers in
sequence.
Erasing a programme
You can erase the programme by:
• pressing 9 twice
™
is displayed briefly and
disappears.
• selecting
or
TAPE
TUNER
CASSETTE RECORDER
Cassette playback
1 Press y to on, then SOURCE to select
™ Display: shows
operation.
2 Insert a cassette and close the door.
3 Press PLAY 2 to start playback.
4 To pause, press PAUSE ;. Press again to resume.
5 Press SEARCH 5 or 6 to fast wind the tape.
6 To stop the tape, press STOP 9.
• The keys are automatically released at the end of a
tape, except if PAUSE ; has been activated.
is
if you try to programme more
source.
TAPE
throughout tape
.