Philips BM50 Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Impianto stereo Philips BM50. Philips BM50 28.
Anche per Philips BM50: Manuale d'uso (28 pagine)

Stampa la pagina
Philips BM50 Manuale d'uso

Prepare the remote control

Caution
•
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
To insert the remote control battery:
1
Open the battery compartment.
2
Insert the supplied AAA battery with
correct polarity (+/-) as indicated.
3
Close the battery compartment.

Set clock

1
In power-on mode, press and hold
CLOCK on the remote control for 3
seconds.
» The [24H] or [12H] hour format is
displayed.
2
to select the [24H] or
Press
/
[12H] hour format.
3
Press CLOCK to confirm.
» The hour digits are displayed and begin
to blink.
4
Press
/
to select hour and press
CLOCKto confirm.
» The minute digits are displayed and
begin to blink.
5
Press
/
to select minute and press
CLOCK to confirm.
Note
•
If no button is pressed in 10 seconds, the system exits
clock setting mode automatically.
8
EN
Tip
•
You can press CLOCK to view clock information in
power-on mode.

Turn on

•
Press .
» The unit switches to the last selected
source.
» The signal strength indicators flash for
several seconds until the unit boots up.
Switch to standby mode
•
Press
again to switch the unit to standby
mode.
» The clock (if set) is displayed on the
panel.
Switch to ECO standby mode:
•
Press and hold
» The display panel is dimmed.
Note
•
The unit switches to Eco Power Standby mode after 15
minutes in standby mode.
•
In group mode, the unit does not go to standby mode
automatically.
To switch between standby mode and ECO
standby mode:
•
Press and hold
for more than 3 seconds.
for more than 3 seconds.