Toshiba SD-2710 Manuale d'uso - Pagina 31

Sfoglia online o scarica il pdf Manuale d'uso per Lettore DVD Toshiba SD-2710. Toshiba SD-2710 50. Video
Anche per Toshiba SD-2710: Manuale d'uso (50 pagine), Manuale d'uso (50 pagine)

Stampa la pagina

Table of

Notes on

Warning

¥ W hen you are co

Digital Theater S

screen displays

38 40

¥ W hen playing DT

stereo jacks. To

2, 4

Playing in Random Order

DVD disp

Playing Repeatedly

Selecting the Camera Angle

Selecting a Language

Selecting the Picture Enhancement (E.P.M.*)

About the illustrations of the battery compartment

TOP MENU

AUDIO OUT (L

There are two types of battery compartment in the

Surround

ª playback, an ex

PAUSE/STEP

SKIP

supplied remote controls. (This does not mean a

You can play titles, chapters within a title, or tracks in random order.

Connectin

BITSTREAM/PC

If the scene was recorded from multiple angles, you can easily change

You can easily select a preferred picture enhancement.

You can select a preferred language and sound recording system from those

You can play a specific title, chapter, track, or segment repeatedly.

PLAY

difference in performance between the two.)

PLAY

7. Do not block any ventilation openings. Install in accordance with the

18. Keep your fingers well clear of the disc tray as it is closing. Neglecting to do

The instructions shall state that an ALL-POLE MAINS SWITCH with a contact separation of at least 3 mm in

(Random playback)

included on the DVD video disc.

(Title repeat, chapter/track repeat, A-B repeat)

the camera angle of the scene you are watching.

STOP

Refer to either illustration depending on the actual

manufacturerÕ s instructions.

so may cause serious personal injury.

each pole shall be incorporated in the electrical installation of the building.

*E.P.M.: Enhanced Picture Mode

Open the cov

remote control.

ENTER

Introduction

CLEAR

CAUTION:

These servicing instructions are for use by qualified service personnel only. To reduce the risk of

Loading batteries

On handling discs

MPEG2 sound

electric shock do not perform any servicing other than that contained in the operating

SAFETY PRECAUTIONS .......................... 2

Good morning!

You can enjoy mo

instructions unless you are qualified to do so.

Do not touch the playback side of the disc.

TOP MENU

IMPORTANT SAFETY INSTRUCTIONS ... 4

realistic sound by

Connecting to an audio system and TV equipped with component video inputs

Number buttons

or MPEG2 audio p

Precautions ............................................... 8

19. Do not place a heavy object on or step on the apparatus. The object may fall,

In the spaces provided below, record the Model and Serial No. located on the rear panel of your DVD video

8. Do not install near any heat sources such as radiators, heat registers, stoves,

causing serious personal injury and serious damage to the apparatus.

Notes on Discs .......................................... 9

DVD

player.

DVD

Playing titles, chapters or tracks in random order

Playing in slow-motion

Selecting the picture enhancement

Selecting a playback audio setting

Changing the camera angle

Repeating a title, chapter, or track

Locating a specific chapter or track directly

DVD

VCD

DVD

or other apparatus (including amplifiers) that produce heat.

VCD

Notes on region numbers ............................... 10

Signal flow

Model No.

Table of Contents.................................... 11

To pause playback (still mode)

Press RANDOM.

DVD

Press ANGLE while playing a scene

Press SLOW during playback.

Press REPEAT.

Press AUDIO during playback.

Press E.P.M.

Press T.

Identification of Controls ....................... 12

Press PAUSE/STEP during playback.

Retain this information for future reference.

recorded with multiple angles.

Play mode indicator

RANDOM

Each time you press the RANDOM

Front panel ..................................................... 12

E.P.M.

SLOW

If you are using a VIDEO CD/audio CD, skip steps 1

AUDIO

Each time you press the REPEAT

The picture enhancement menu

Each time you press the SLOW

The current audio setting is

Insert batterie

REPEAT

To resume normal playback, press

PAUSE/STEP

VCD

and 2. Then at step 3, enter the number for the track

button, the random playback mode

ANGLE

button, the repeat mode changes as

appears.

displayed.

button, the slow-motion speed

Rear panel ...................................................... 12

While playing a scene recorded with

the PLAY button.

you want using the number buttons.

changes as follows.

Do not attach paper or tape to discs.

changes.

follows.

multiple angles, the angle icon (

DVD display .................................................... 13

20. Do not use a cracked, deformed, or repaired disc. These discs are easily

Connectin

• The sound is muted during still

flashes in the DVD display.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A

broken and may cause serious personal injury and apparatus malfunction.

Remote control ............................................... 14

e.g.

Location of the required label

Press the ANGLE button while the

polarized plug has two blades with one wider than the other. A grounding

Loading batteries ............................................ 15

angle icon is flashing.

type plug has two blades and a third grounding prong. The wide blade or the

Operating with the remote control .................. 15

To stop playback

third prong are provided for your safety. If the provided plug does not fit into

e.g.

Press STOP.

your outlet, consult an electrician for replacement of the obsolete outlet.

Chapter Repeat

DVD

Connections

DVD

Press

to highlight the space of

Resuming playback from the same location

2 channel digital s

Chapter Random

DVD

VCD

To ANALOG AUDIO OUT

STOP

" C (Chapter)."

You can enjoy the

Connecting to a TV ................................. 16

On cleaning discs

amplifier equipped

Title Repeat

DVD

Connecting to a TV ......................................... 16

speakers).

PRODUCT IS CERTIFIED BY THE MANUFACTURER TO

Press STOP at the location where you

Connecting to an audio system and TV

Title Random

COMPLY WITH DHHS RULE 21 CFR SUBCHAPTER J

DVD

VCD

Track Repeat

Fingerprints and dust on the disc cause picture and

The abbreviation of the language appears instead

To remove the disc

want to interrupt playback.

ENTER

APPLICABLE AT THE DATE OF MANUFACTURE.

equipped with component video inputs ........ 17

sound deterioration. Wipe the disc from the center

of the language name. Refer to the list of

Press OPEN/CLOSE.

To audio inputs of

MANUFACTURED

STOP

The DVD video player memorizes

Connecting to Optional Equipment ...... 18

outwards with a soft cloth. Always keep the disc

languages and their abbreviations.

VCD

DVD

Track Random

the amplifier

10. Protect the power cord from being walked on or pinched particularly at plugs,

All Repeat

VCD

the location where playback is

clean.

Remove the disc after the disc tray

Connecting to an amplifier equipped with a

convenience receptacles, and the point where they exit from the apparatus.

stopped.

opens completely.

To OPTICAL

Dolby Digital decoder ................................... 18

OPEN/CLOSE

Press ANGLE or

DVD/VIDEO CD/CD indicator

Enter the number for the chapter or

Selecting sound channels of VIDEO CDs

type digital

Connecting to an amplifier equipped with

Repeat Off

number is displayed on the TV screen.

1-1,SHIBAURA 1-CHOME,MINATO-KU.

track you want, using

audio input

You can switch left and right channels by pressing the

Make sure to match the + and Ð on the batteries

Press PLAY.

Dolby Pro Logic Surround ............................ 18

TOKYO 105-8001,JAPAN

number buttons.

AUDIO button repeatedly during playback.

Random Off

Each time you press the ANGLE

ANGLE

to the marks inside the battery compartment.

Connecting to an amplifier equipped with a

The DVD video player resumes

PLAY

Select the picture enhancement by

button, the camera angle changes.

When you use the number buttons, you can use

DTS decoder ................................................ 18

playback from the location where

pressing E.P.M. or

DVD

the +10 button to select numbers from 10 through

Close the cover.

Repeating a specific segment

you stopped playback.

Connecting to an amplifier equipped with an

If you press the RANDOM button

VCD

When you start playback, the elapsed time indicators appear. Pressing the FL SELECT button switches

Press DISPLA

99.

MPEG2 audio decoder ................................. 19

during playback, the DVD video

If you cannot wipe off the dust with a soft cloth, wipe

them to the title/chapter/track number indicators. Some discs may not permit this operation.

11. Only use attachments/accessories specified by the manufacturer.

Each time you press the button, the picture

You can change the camera angle

e.g. To select chapter or track 25

player automatically starts random

Connecting to an amplifier equipped with a

ENTER

the disc lightly with a slightly moistened soft cloth and

enhancement changes.

directly by pressing the number

Press A-B RPT at the beginning of the

playback after finishing the current

digital audio input ......................................... 19

finish with a dry cloth.

buttons corresponding to its angle

Component video (ColorStream

title, chapter or track.

segment (point A) you want to play

Be sure to press the OPEN/CLOSE button to close

Do not use any type of solvent such as thinner,

The indicators vary depending on the kinds of discs you play.

number instead of using the

Some TVs or monitors are equipped with component video inputs. Connecting to

Basic playback

Notes on batteries

repeatedly.

benzine, commercially available cleaners or antistatic

the disc tray after you remove the disc.

+10

Output sound conversion table (sampling frequency/quantization bit)

buttons.

these inputs allows you to enjoy higher quality picture playback.

Improper use of batteries may cause battery leakage and

Normal:

Press PLAY.

spray for vinyl LPs. It may damage the disc.

Playing a Disc ......................................... 20

Actual labels for component video inputs may vary depending on the TV

A-B RPT

corrosion. To operate the remote control correctly, follow the

Standard black level (7.5 IRE).

DVD video disc

The DVD video player starts random

Basic playback ................................................ 20

PLAY

instructions below.

manufacturer. (ex. Y, R-Y, B-Y or Y, C

Recording system

Discs

playback.

12.Use only with the cart, stand, tripod, bracket, or table specified by the

Notes

¥ Do not insert batteries into the remote control in the wrong

In some TVs or monitors, the color levels of the playback picture may be reduced

On storing discs

Playing in fast reverse or fast forward

DVD

Locating a specific chapter or track

Press the PLAY button within about

Enhanced Black Level:

manufacturer, or sold with the apparatus. When a cart is used, use caution

¥ D O NOT connec

direction.

VCD

slightly or the tint may change. In such a case, adjust the TV or monitor for

directions ...................................................... 22

5 seconds after you press the

¥ During playback:

Enhanced Black Level (0 IRE).

Receiver. This in

when moving the cart/apparatus combination to avoid injury from tip-over.

¥ Do not charge, heat, open, or short-circuit the batteries.

optimum performance.

Playing frame by frame ................................... 22

0 : 0 8 : 1 6

Do not store discs in a place subject to direct sunlight

RANDOM button.

AUDIO OUT jac

Do not throw batteries into a fire.

Example

Playing in slow-motion .................................... 23

or near heat sources.

¥ C onnect the BITS

¥ Do not leave dead or exhausted batteries in the remote

Press A-B RPT again at the end of the

Press SKIP

Do not store discs in places subject to moisture and

Movie 1:

Resuming playback from the same location ... 23

TITLE

Receiver or Proc

control.

DVD video

segment (point B).

the chapter or track number you want.

Linear PCM

DVD

dust such as a bathroom or near a humidifier.

Brightness levels raised for

discs

¥ R efer to the owne

Õ s manual of the

¥ Do not use different types of batteries together, or mix old

Locating a Specific Title, Chapter, or

Playback starts from the selected chapter or track.

Store discs vertically in a case. Stacking or placing

The DVD video player automatically

enhanced picture clarity.

¥ W hen you conne

and new batteries.

A-B RPT

Track ........................................................ 24

returns to point A and starts repeat

objects on discs outside of their case may cause

from the wall out

¥ If you do not use the remote control for a long period of

SKIP

Notes

Playing chapter 3 of title 2

To locate succeeding chapters or tracks

Movie 2:

Locating a title using the top menu ................. 24

playback of the selected segment

warping.

¥ T he output sound

time, remove the batteries to avoid possible damage from

Notes

• Refer to the owner ' s manual of the connected equipment as well.

For deeper, richer color

Locating a title by entering the title number .... 24

(A-B).

listening level. O

battery corrosion.

• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment

• Do not move the DVD video player during playback. Doing so may damage the disc.

VIDEO CDs

reproduction.

SKIP

¥ T urn off the amp

Locating a specific chapter or track directly .... 25

Playback starts from the beginning of

¥ If the remote control does not function correctly or if the

• Use the OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may

from the wall outlet before making any connections.

Linear PCM 44.1 kHz/16 bit

Some discs may not display chapter

Audio CDs

on, the speakers m

the current chapter or track.

operating range becomes reduced, replace all batteries

• If you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the

cause the DVD video player to malfunction.

Locating a specific chapter or track ................ 25

Animation:

numbers or elapsed time.

with new ones.

When you press twice, playback starts

• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD video

DVD video player away from the tuner and radio.

For enhanced color contrast.

¥ If battery leakage occurs, wipe the battery liquid from the

• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver

player to malfunction.

from the beginning of the preceding

To turn off the on-screen display, press

battery compartment, then insert new batteries.

• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen

listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

chapter or track.

DISPLAY again.

• Turn off the amplifier before you connect or disconnect the DVD video player

menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the

STOP button on your remote control once the movie is completed.

on, the speakers may be damaged.

Downloaded From DvDPlayer-Manual.com Toshiba Manuals

. Otherwise, h

To obtain a higher quality picture

Occasionally, some picture noise not usually visible during a normal broadcast

may appear on the TV screen while playing a DVD video disc because the high

resolution pictures on these discs include a lot of information. While the amount of

noise depends on the TV you use with this DVD video player, you should generally

reduce the sharpness adjustment on your TV when viewing DVD video discs.

About

DVD

The

DVD

VCD

function described under that heading.

¡Buenos días!

Bonjour!

: You can use this function with DVD video discs.

DVD

: You can use this function with VIDEO CDs.

VCD

: You can use this function with audio CDs.

Amplifier equip

MPEG2 audio d

Total playing time indicator

To OPTICAL

To COAXIAL

type digital

VIDEO OUT

AUDIO OUT

audio input

Playback side

TITLE

VIDEO

Title number indicator

e.g.

COAXIAL OPTICAL

ANALOG

BITSTREAM/PCM

mode.

Chapter Repeat

–

– –

Chapter Random

ENG1 PCM 2CH

(red)

(white)

ENG2

D 2CH

Repeats the current

To P

Plays the chapters

chapter.

VIDEO

within the current title

OUT

in random order.

Repeats the current

e.g.

title.

–

– –

Plays the titles in

Repeats the current

random order.

track.

Amplifier equip

Multifunctional indicator (indicates operating status or

Plays the tracks in

a digital audio in

Repeats the entire

messages, etc.)

random order.

disc.

(red)

(white)

To COAXIAL

while the angle

type digital

Resumes normal

audio input

or the

playback.

Resumes normal

playback.

/ .

Audio system

) outputs/inputs

+10

, C

)

AÐ

BITSTREAM/PCM

jack

Dolby Digital

¥ During playback:

Bitstream

9.6

48 kHz/16 bit

Example

48 kHz/20 bit

48 kHz/16 bit

repeatedly to display

CHP

48 kHz/24 bit

48 kHz/16 bit

96 kHz/16 bit

48 kHz/16 bit

VCD

96 kHz/20 bit

48 kHz/16 bit

96 kHz/24 bit

48 kHz/16 bit

DTS

Bitstream

MPEG1, MPEG2

Bitstream

44.1 kHz/16 bit 44.1 kHz/16 bit

MPEG1

44.1 kHz/16 bit

Some discs may not display track

Bitstream

DTS

numbers or elapsed time.

AÐ B

OFF

Ò A udio O

ª decoder

Pressing

control c

VCD

Advanced playback

Operating with the remote control

Structure of disc contents

icons on the heading bar show the playable discs for the

Accessing a Specific Location Directly ...

Entering the time counter of the desired

Normally, DVD video discs are divided into titles, and

FL DIM

location ......................................................... 26

Point the remote control at the remote

the titles are sub-divided into chapters. VIDEO CDs and

audio CDs are divided into tracks.

sensor and press the buttons.

Playing Repeatedly ................................. 27

Repeating a title, chapter, or track .................. 27

DVD video disc

Repeating a specific segment ........................ 27

Serial No.

To resume normal playback

About the screen saver

To exit the picture enhancement selection

To turn off the angle number display

Playing in a Favorite Order .................... 28

Title 1

Press AUDIO or

Press PLAY.

Chapter number indicator

Press CLEAR.

If you pause a picture of a DVD video disc and leave it

Press CLEAR.

Press ENTER.

Press PLAY.

Setting titles, chapters, or tracks in a favorite

VIDEO OUT

AUDIO OUT

Connect e

Chapter 1

Chapter 2

setting is displayed on the TV screen.

VIDEO

still for a long while, the screen saver of the DVD video

PLAY

order ............................................................. 28

PLAY

CLEAR

TOTAL

CHP

PLAY

CLEAR

Memory playback indicator

75 coaxial cab

player automatically appears (when " Screen Saver " is

AUDIO

L COAXIAL OPTICAL

Playing in Random Order ....................... 29

: Title number (Track number)

ANALOG

BITSTREAM/PCM

)

set to " On"

Optical digit

Track number

Locate a title or track using the number buttons.

ENTER

Playing titles, chapters or tracks in random

Within about 7 m (23 feet)

PLAY button.

indicator

order ............................................................. 29

To select a title and chapter number at the same

Notes

Note

: Chapter number

time

Zooming a Picture .................................. 30

• Some discs may not permit random playback operation.

VIDEO CD/audio CD

Locate a chapter using the number buttons.

Notes

The sound is muted during slow-motion playback.

Automatic Power Off function

¥ You cannot use the random playback function in conjunction

• You can change the camera angle during still playback. The

Perform step 1, and enter a title number you want in the

Zooming a picture ........................................... 30

If the DVD video player is stopped, or the screen saver

ENTER

: To stop playback.

with the memory playback function.

camera angle changes to the new setting when you resume

space of " T (Title)" using the number buttons or the /

is engaged for approximately 20 minutes, the DVD

Selecting the Picture Enhancement

To resume normal playback

To P

To Y

normal playback.

Track 1

buttons then perform steps 2 to 4.

Note

video player will automatically turn itself off.

VIDEO

(E.P.M.) ..................................................... 31

VIDEO

Press CLEAR.

¥ If you pause a picture immediately after changing a camera

Actual effect to picture may vary depending on the TV. Make

Distance: About 7 m (23 feet) from the front of the

OUT

: Playback starts from the beginning of the

Selecting the picture enhancement ................ 31

angle, the resumed playback picture may not display the new

selection according to your preference.

Note

CLEAR

remote sensor

current chapter or track.

To start playback from the beginning regardless

camera angle.

Pressing the CLEAR button resets the title and chapter

Selecting the Sound Enhancement

Angle:

About 30 in each direction of the front of

of the location where you stopped playback

numbers. To clear the " T (Title)" and " C (Chapter) " display,

To turn off the audio setting display, press the

(E.A.M.) .................................................... 32

: Fast reverse playback

the remote sensor

1 Press STOP twice.

press the T button several times.

Each title, chapter or track is assigned a number, which

CLEAR button.

Selecting the sound enhancement ................. 32

Note

is called Ò title numberÓ , Ò chapter numberÓ or Ò track

* Do not expose the remote sensor of the DVD video

STOP

Selecting the Camera Angle .................. 33

Some discs may not permit repeat operation.

: To start playback.

numberÓ respectively.

player to a strong light source such as direct

To Y video input

Changing the camera angle ........................... 33

There may be discs that do not have these numbers.

sunlight or other illumination. If you do so, you may

Notes

Connect e

VIDEO OUT

AUDIO OUT

VIDEO

Selecting Subtitles ................................. 34

not be able to operate the DVD video player via the

2 Press PLAY.

¥ When you turn on the DVD video player or replace a disc,

: Fast forward playback

To P

remote control.

75 coaxial cab

player returns to the initial default setting

Selecting a subtitle language ......................... 34

Notes on copyright

L COAXIAL OPTICAL

PLAY

ANALOG

BITSTREAM/PCM

If you select a sound track which is not included on the disc,

Optical digi

Selecting a Language ............................. 35

To P

the DVD video player plays a prior sound track programmed

: To locate succeeding chapters or tracks.

It is forbidden by law to copy, broadcast, show,

Selecting a playback audio setting ................. 35

on the disc.

Notes on the remote control

broadcast on cable, play in public, and rent copyrighted

¥ Some discs allow you to change audio selections only via

On-screen Display Operation ................ 36

¥ Direct the remote control at the remote sensor of the DVD

material without permission.

: To begin slow motion playback.

the disc menu. If this is the case, press the MENU button

video player.

On-screen display operation .......................... 36

To resume normal playback

• If you want to return to the beginning of a DVD video

and choose the appropriate language from the selections on

¥ Do not drop or give the remote control a shock.

disc, open and close the disc tray once with the

DVD video discs are copy protected, and any recordings

Press CLEAR.

the disc menu.

¥ Do not leave the remote control near an extremely hot or

Function setup

: To pause playback.

OPEN/CLOSE button before pressing the PLAY

made from these discs will be distorted.

humid place.

CLEAR

button.

¥ Do not spill water or put anything wet on the remote

Customizing the Function Settings ...... 38

This product incorporates copyright protection

control.

Setting procedure ........................................... 38

: To turn off the display.

Audio selection from the menu

VIDEO CD

Notes

technology that is protected by method claims of certain

¥ Do not open the remote control.

Setting details ................................................. 40

Ò Bitstream Ó

Ò Analog 2chÓ

• The DVD video player ' s memory is also cleared when:

U.S. patents and other intellectual property rights owned

Notes

ANALOG AUDIO

BITSTREAM/PCM

– you change the parental lock setting

• Some discs may not permit A-B repeat operation.

by Macrovision Corporation and other rights owners.

OUT jacks

jack

Others

menu language

¥ You cannot set the A-B repeat function for a segment that

Use of this copyright protection technology must be

The on-screen display will vary depending on the disc.

Bitstream

48 kHz/20 bit

– you open the disc tray.

includes multiple camera angles

authorized by Macrovision Corporation, and is intended

Table of Languages ................................ 46

48 kHz/16 bit

Notes

• There may be a difference in the location where playback

¥ You can specify a segment only within the current title or

: Data transfer rate (Mbit/s)

for home and other limited viewing uses only unless

48 kHz/20 bit

48 kHz/16 bit

DVD

Before Calling Service Personnel ......... 47

• Some titles may not display chapter numbers.

resumes depending on the disc.

track (VIDEO CD).

= Amount of picture, sound and subtitle data in the

otherwise authorized by Macrovision Corporation.

48 kHz/24 bit

48 kHz/16 bit

TRK

• If you press and hold the SKIP

• Settings you changed using the on-screen displays while the

DVD video disc transferred per second.

¥ There may be a slight difference between point A and the

Specifications ......................................... 48

48 kHz/16 bit

Reverse engineering or disassembly is prohibited.

panel during playback, the DVD video player performs fast

DVD video player keeps a location in the memory may

The larger the value is, the more data processed,

location where playback actually resumes depending on the

48 kHz/20 bit

LIMITED WARRANTY DVD VIDEO

reverse or fast forward playback. You can vary the speed by

function only after the memory is cleared.

but this does not necessarily insure better picture

48 kHz/24 bit

disc.

PLAYER ................................................... 49

Playing track 6

pressing the button repeatedly.

quality.

Bitstream

To locate chapters or tracks during fast reverse or fast

48 kHz/16 bit

Bitstream

: CD-Text

forward playback, first press the PLAY button to resume

44.1 kHz/16 bit

Õ s power

Displays CD-Text data if included on the audio

44.1 kHz/16 bit

normal playback, then use the SKIP

44.1 kHz/16 bit

CDs. (Some letters may not be displayed properly

• When you set " Title Stop " to " Off"

(Noise)

Bitstream

depending on the disc.)

chapters in another title. If you go back to the preceding title

by pressing the SKIP

: The on-screen display turns off.

VCD

locates the first chapter of the title. When

' s power cord. If you leave the amplifier power

to " On," you can access chapters only within the current title.

Ó to Ò P CM

Ó from

PLAY

ENTER

1, 2

CLEAR

1, 2

CLEAR

REPEAT

Dimmed

Normal

A-B RPT

¥ U se D

the M

¥ M ake

DVD video disc

Title 2

while the audio

On-scre

Chapter 1

Chapter 2

Playback starts from the selected

The DVD video player starts repeat

AC IN

A - B

Ò A udio

playback.

chapter or track.

Alternatively leave the DVD video

Each time you press the AUDIO

Press the PLAY button within about

). To turn off the screen saver, press the

button, the audio settings included

player unattended for about 5

Record

5 seconds after you press the

seconds after having made a

on the DVD video disc change.

Random playback indicator

REPEAT button.

selection.

VIDEO CD/audio CD

If you press the

Track 2

Track 3

Track 4

can select output sound format.

¥ M ake

The DVD video player ' s memory is

cleared.

Angle icon indicator

On-scre

Repeat playback indicator

video input

Ò A udio

Playback starts from the

DVD

beginning of the current title.

video input

Playback starts from the

VCD

TV or monitor with

beginning of the disc.

component video inputs

• Make the following setting.

On-screen display

and output jacks on the rear panel

Audio CD

" Audio Out Select "

" Analog 2ch "

ANALOG AUDIO

BITSTREAM/PCM

OUT jacks

jack

48 kHz/20 bit

¥ During playback:

48 kHz/16 bit 48 kHz/20 bit

48 kHz/16 bit

Example

48 kHz/20 bit

48 kHz/16 bit

Ò O PTIC

Ó or Ò C OA

Ó inp

48 kHz/24 bit

48 kHz/16 bit

96 kHz/16 bit

48 kHz/16 bit

S3125A

96 kHz/20 bit

48 kHz/16 bit

96 kHz/24 bit

48 kHz/16 bit

Playing track 6

Õ s vol

48 kHz/16 bit

48 kHz/16 bit 48 kHz/16 bit

44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit

44.1 kHz/16 bit

, you can access

(Noise)

Bitstream

: 3D (N-2-2) sound enhancement can function.

' s volume to a moderate

button, the DVD video player

Off

Pag

Chapter 3

Ò B itst

MPE

To wall outlet

buttons, you

Track 5

Pag

Ò P CM

Select:

Page

Ò PCMÓ

ANALOG AUDIO

or select a disc

OUT jacks

48 kHz/16 bit

48 kHz/20 bit

TRK

48 kHz/24 bit

button on the front

48 kHz/16 bit

48 kHz/20 bit

48 kHz/24 bit

44.1 kHz/16 bit

button.

(Noise)

" Title Stop " is set