Philips BTM2310 Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Impianto stereo Philips BTM2310. Philips BTM2310 22.
Anche per Philips BTM2310: Manuale d'uso (22 pagine), Manuale d'uso breve (2 pagine), Manuale d'uso breve (2 pagine), Manuale d'uso breve (2 pagine), Manuale di servizio (25 pagine), Manuale d'uso (22 pagine), Manuale d'uso (22 pagine)

Stampa la pagina
Philips BTM2310 Manuale d'uso
To insert the remote control battery:
1
Open the battery compartment.
2
Insert the supplied AAA battery with
correct polarity (+/-) as indicated.
3
Close the battery compartment.

Set clock

1
In standby mode, press and hold CLOCK
on the remote control for more than two
seconds.
» [24H] or [12H] hour format is
displayed.
2
to select [24H] or [12H]
Press
/
hour format.
3
press CLOCK to confirm.
» The hour digits are displayed and begin
to blink.
4
Repeat steps 2-3 to set hour and minute.
Note
•
If no button is pressed in 90 seconds, the system exits
clock setting mode automatically.
Tip
•
You can view clock information in power-on mode by
pressing CLOCK.

Turn on

Press .
» The unit switches to the last selected
source.
8
EN
Switch to standby mode
Press
again to switch the unit to standby
mode.
» The clock (if set) is displayed on the
panel.
Switch to ECO standby mode:
Press and hold
for more than two seconds.
» The display panel is dimmed.
-
Note
•
The unit switches to Eco Power Standby mode after 15
minutes in standby mode.
Switch between standby mode and ECO
standby mode:
Press and hold
for more than two seconds.